Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
VPN Aggregation for VoIP Calls Overview
This topic describes how VPN aggregation functions in the BGF voice solution.
Introduction to VPN Aggregation
The VPN aggregation feature uses VPN routing and forwarding (VRF) so users on one VPN can call users on another VPN. For example, in Figure 13, users in VPN B can call users in VPN A and VPN C.
Figure 13: VPN Aggregation in a VoIP Network
VPN aggregation provides the following benefits:
- Provides a scalable way to configure VRFs in a mesh-like configuration that uses only one logical service interface for each VRF.
- Reduces the number of service sets that you need because you can add all of your logical service interfaces to a pool of interfaces, and then assign the entire pool of interfaces to a service set.
- Configurations are inline so that, when you provision the service set for VRFs, you can seamlessly tie the service into the BGF service without the need for additional configuration states.
- Uses the router’s native support for VRFs and VPNs, which omits the need for an external element that terminates the VRFs and replaces them with the VLAN tags required to support VoIP media handling.
How VPN Aggregation Works
VPN aggregation uses the virtual interface configurations as shown in Figure 14 to route traffic from users in one VPN to users in another VPN.
Figure 14: Overview of VPN Aggregation Configuration
The VPN aggregation configuration consists of:
- VRFs—One for each VPN. The VRF is required to create a Layer 3 VPN. The VRF must have the instance type of VRF, a logical service interface, a route distinguisher, and VRF import and export policies.
- Pool of logical service interfaces—One pool that contains all service interfaces that are configured in your VRF routing instances. Instead of explicit inside and outside service interfaces, all of the interfaces in the pool can be both inside and outside service interfaces.
- Service Set—One service set that has a next-hop service set to the pool of logical service interfaces and that contains a PGCP rule. The service set links the VRFs to the PGCP service.
- Virtual interface—One for each VRF routing instance.
The virtual interface configuration establishes the relationship between
the following parts of the configuration:
- NAT pool (the media service contains the NAT pool)
- VRF routing instance to which the NAT routes are added
- The service interface
When a gate is established, the pgcpd process uses the virtual interface information in the termination ID to determine the ingress and egress virtual interfaces for the gate. In turn, the virtual interface configuration maps to the VRF, NAT pool, and service interface.
The termination IDs of the caller and the call recipient contain the virtual interface ID. For example, in Figure 14, termination ID ip/4/vif-1/1 matches virtual interface vif-1, which is mapped through the configuration to routing instance vrf1.
