Configuring Dynamic Access-Internal Routes for DHCP Subscriber Management

You can dynamically configure access-internal routes. Configuring support for access-internal variables is optional, but it ensures that if the next-hop value is missing in the Framed-Routes Attribute [22], values from the access-internal variables are used instead.

DHCP subscriber interfaces require the qualified-next-hop to identify the interface and the MAC address.

To dynamically configure access-internal routes:

1. Specify that you want to configure the access-internal route.
   user@host# edit dynamic-profiles profile-name routing-options
2. Configure the IP address and the qualified next-hop address as variables.
   [edit dynamic-profiles profile-name routing-options]user@host# edit access-internal route $junos-subscriber-ip-address qualified-next-hop $junos-interface-name

   Note: Prior to Junos OS Release 10.0, the variable used for qualified-next-hop was $junos-underlying-interface. It is now $junos-interface-name.

3. Configure the MAC address for the qualified next-hop as a variable.
   [edit dynamic-profiles profile-name routing-options access-internal route $junos-subscriber-ip-address qualified-next-hop $junos-underlying-interface]user@host# set mac-address $junos-subscriber-mac-address

Related Topics

• Access and Access-Internal Routes for Subscriber Management
• Configuring Dynamic Access Routes for Subscriber Management
• Verifying the Configuration of Access and Access-Internal Routes for Subscriber Management