algorithm

Syntax

algorithm (hmac-md5 | md5);

Hierarchy Level

[edit logical-systems logical-system-name services mobile-ip peer ip-address address spi hexadecimal-value],[edit logical-systems logical-system-name services mobile-ip peer nai user@domain spi hexadecimal-value],[edit logical-systems logical-system-name routing-instances routing-instances-name services mobile-ip peer ip-address address spi hexadecimal-value],[edit logical-systems logical-system-name routing-instances routing-instances-name services mobile-ip peer nai user@domain spi hexadecimal-value],[edit routing-instances routing-instances-name services mobile-ip peer ip-address address spi hexadecimal-value],[edit routing-instances routing-instances-name services mobile-ip peer nai user@domain spi hexadecimal-value],[edit services mobile-ip peer ip-address address spi hexadecimal-value],[edit services mobile-ip peer nai user@domain spi hexadecimal-value]

Release Information

Statement introduced in Junos OS Release 9.3.

Support at the [edit logical-systems logical-system-name services mobile-ip peer ip-address address spi hexadecimal-value], [edit logical-systems logical-system-name services mobile-ip peer nai user@domain spi hexadecimal-value], [edit logical-systems logical-system-name routing-instances routing-instances-name services mobile-ip peer ip-address address spi hexadecimal-value], [edit logical-systems logical-system-name routing-instances routing-instances-name services mobile-ip peer nai user@domain spi hexadecimal-value], [edit routing-instances routing-instances-name services mobile-ip peer ip-address address spi hexadecimal-value], [edit routing-instances routing-instances-name services mobile-ip peer nai user@domain spi hexadecimal-value] hierarchy levels added in Junos OS Release 9.5.

Description

Configure the algorithm used for authenticating Mobile IP messages.

Default

HMAC-MD5 is used by default.

Options

hmac-md5—Specifies algorithm hmac-md5

md5—Specifies algorithm md5

Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.