Configuring an Address-Assignment Pool Name and Addresses

To configure an address-assignment pool, you must specify the name of the pool and configure the addresses for the pool.

To configure an IPv4 address-assignment pool:

1. Configure the name of the pool and specify the IPv4 family.
   [edit access]user@host# edit address-assignment pool isp_1 family inet
2. Configure the network address and the prefix length of the addresses in the pool.
   [edit access address-assignment pool isp_1 family inet]user@host# set network 192.168.0.0/16

To configure an IPv6 address-assignment pool:

1. Configure the name of the pool and specify the IPv6 family.
   [edit access]user@host# edit address-assignment pool isp_2 family inet6
2. Configure the IPv6 network prefix for the address pool. The prefix specification is required when you configure an IPv6 address-assignment pool.
   [edit access address-assignment pool isp_2 family inet6]user@host# set prefix 2008:2009::/32

Related Topics

• Address-Assignment Pools Overview
• Configuring Address-Assignment Pools