traffic-engineering (Passive TE Mode)

Syntax

traffic-engineering {remote-node-id address;}

Hierarchy Level

[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name passive],[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name passive],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name passive],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name passive],[edit protocols (ospf | ospf3) area area-id interface interface-name passive],[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name passive],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name passive],[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name passive]

Release Information

Statement introduced in Junos OS Release 8.0.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Support for the realm statement introduced in Junos OS Release 9.2.

Support for the realm statement introduced in Junos OS Release 9.2 for EX Series switches.

Description

Configure an interface in OSPF passive traffic engineering mode to enable dynamic discovery of OSPF AS boundary routers.

Default

OSPF passive traffic-engineering mode is disabled.

Options

remote-node-id address—The IP address at the far end of the inter-AS link.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.