spf-options

Syntax

spf-options {delay milliseconds;holddown milliseconds;rapid-runs number;}

Hierarchy Level

[edit logical-systems logical-system-name protocols (ospf | ospf3)],[edit logical-systems logical-system-name protocols ospf topology (default | ipv4-multicast | name)],[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3)],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf topology (default | ipv4-multicast | name)],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],[edit protocols (ospf | ospf3)],[edit protocols ospf topology (default | ipv4-multicast | name)],[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],[edit routing-instances routing-instance-name protocols (ospf | ospf3)],[edit routing-instances routing-instance-name protocols ospf topology (default | ipv4-multicast | name)],[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)]

Release Information

Statement introduced in Junos OS Release 8.5.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Support for Multitopology Routing introduced in Junos OS Release 9.0.

Support for Multitopology Routing introduced in Junos OS Release 9.0 for EX Series switches.

Support for the realm statement introduced in Junos OS Release 9.2.

Support for the realm statement introduced in Junos OS Release 9.2 for EX Series switches.

Description

Configure options for running the shortest-path-first (SPF) algorithm. You can configure a delay for when to run the SPF algorithm after a network topology change is detected, the maximum number of times the SPF algorithm can run in succession, and a hold-down interval after the SPF algorithm runs the maximum number of times.

Options

delay milliseconds—Time interval between the detection of a topology change and when the SPF algorithm runs.

Range: 50 through 8000 milliseconds

Default: 200 milliseconds

holddown milliseconds—Time interval to hold down, or wait before a subsequent SPF algorithm runs after the SPF algorithm has run the configured maximum number of times in succession.

Range: 2000 through 20,000 milliseconds

Default: 5000 milliseconds

rapid-runs number—Maximum number of times the SPF algorithm can run in succession. After the maximum is reached, the holddown interval begins.

Range: 1 through 5

Default: 3

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.