protocols

Syntax

protocols {bgp {... bgp-configuration ...}isis {... isis-configuration ...}ldp {... ldp-configuration ...}msdp {... msdp-configuration ...}mstp {... mstp-configuration ...}ospf {domain-id domain-id;domain-vpn-tag number;route-type-community (iana | vendor);... ospf-configuration ...}ospf3 {domain-id domain-id;domain-vpn-tag number;route-type-community (iana | vendor);... ospf3-configuration ...}pim {... pim-configuration ...}rip {... rip-configuration ...}ripng {... ripng-configuration ...}rstp {rstp-configuration;}vstp {vstp configuration;}}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name],[edit routing-instances routing-instance-name]

Release Information

Statement introduced before Junos OS Release 7.4.

Support for RIPng introduced in Junos OS Release 9.0.

Description

Specify the protocol for a routing instance. You can configure multiple instances of the following supported protocols: BGP, IS-IS, LDP, MSDP, OSPF, OSPFv3, PIM, RIP, and RIPng.

Options

bgp—Specify BGP as the protocol for a routing instance.

isis—Specify IS-IS as the protocol for a routing instance.

ldp—Specify LDP as the protocol for a routing instance.

msdp—Specify the Multicast Source Discovery Protocol (MSDP) for a routing instance.

mstp—Specify the Multiple Spanning Tree Protocol (MSTP) for a virtual switch routing instance.

ospf—Specify OSPF as the protocol for a routing instance.

ospf3—Specify OSPF version 3 (OSPFv3) as the protocol for a routing instance.

Note: OSPFv3 supports the no-forwarding and vrf routing instance types only.

pim—Specify the Protocol Independent Multicast (PIM) protocol for a routing instance.

rip—Specify RIP as the protocol for a routing instance.

ripng—Specify RIP next generation (RIPng) as the protocol for a routing instance.

rstp—Specify the Rapid Spanning Tree Protocol (RSTP) for a virtual switch routing instance.

vstp—Specify the VLAN Spanning Tree Protocol (VSTP) for a virtual switch routing instance.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.