maximum-paths

Syntax

maximum-paths path-limit <log-interval seconds> <log-only | threshold value>;

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options],[edit logical-systems logical-system-name routing-options],[edit routing-instances routing-instance-name routing-options],[edit routing-options]

Release Information

Statement introduced in Junos OS Release 8.0.

Statement introduced in Junos OS Release 9.0 for EX Series switches.

Description

Configure a limit for the number of routes installed in a routing table based upon the route path.

Options

log-interval seconds—(Optional) Minimum time interval (in seconds) between log messages.

Range: 5 through 86,400

log-only—(Optional) Sets the route limit as an advisory limit. An advisory limit triggers only a warning, and additional routes are not rejected.

path-limit—Maximum number of routes. If this limit is reached, a warning is triggered and additional routes are rejected.

Range: 1 through 4,294,967,295 (2³² – 1)

Default: No default

threshold value—(Optional) Percentage of the maximum number of routes that starts triggering warning. You can configure a percentage of the path-limit value that starts triggering the warnings.

Range: 1 through 100

Note: When the number or routes reaches the threshold value, routes are still installed into the routing table while warning messages are sent. When the number or routes reaches the path-limit value, then additional routes are rejected.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.