priority-hold-time

Syntax

priority-hold-time seconds;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family inet address address vrrp-group group-id track],[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id track],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet address address vrrp-group group-id track],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id track]

Release Information

Statement introduced in Junos OS Release 8.1.

Description

Configure a Virtual Router Redundancy Protocol (VRRP) router’s priority hold time to define the minimum length of time that must elapse between dynamic priority changes. If the dynamic priority changes because of a tracking event, the priority hold timer begins. If another tracking event or manual configuration change occurs while the timer is running, the new dynamic priority update is postponed until the timer expires.

Options

seconds—The minimum length of time that must elapse between dynamic priority changes.

Range: 1 through 3600 seconds

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.