Junos® OS, Release 10.3
Ethernet Terms and Acronyms
Networking and Internetworking with Bridges and Routers
Network Addressing at Layer 2 and Layer 3
Networking at Layer 2: Benefits of Ethernet Frames
Networking at Layer 2: Challenges of Ethernet MAC Addresses
Networking at Layer 2: Forwarding VLAN Tagged Frames
Networking at Layer 2: Forwarding Dual-Tagged Frames
Networking at Layer 2: Logical Interface Types
A Metro Ethernet Network with MX Series Routers
Layer 2 Features for a Bridging Environment
Layer 2 Features for a Switching Environment
MX Series Router as a Layer 2 DHCP Relay Agent
MX Series Router ATM Ethernet Interworking Function
VLANs Within a Bridge Domain or VPLS Instance
Packet Flow Through a Bridged Network with Normalized VLANs
Bulk Configuration of VLANs and Bridge Domains
Dynamic Profiles for VPLS Pseudowires
Firewall Filters for Bridge Domains and VPLS Instances
Ethernet Operations, Administration, and Maintenance
Ethernet OAM Connectivity Fault Management
Ethernet Frame Delay Measurements
Ethernet OAM Link Fault Management
Ethernet Ring Protection
Ethernet Ring Protection Using Ring Instances for Load Balancing
Layer 2 Networking Standards
Configuring a Normalized VLAN for Translation or Tagging
Configuring Learning Domains for VLAN IDs of Logical Interfaces
Configuring Virtual Switches as Separate Routing Instances
Configuring MEP Interfaces to Support ETH-DM
Triggering an ETH-DM Session
Viewing Ethernet Frame Delay Measurements Statistics
Roadmap for Configuring a Basic Bridge Domain Environment
Configuring Interfaces and VLAN Tags
Configuring Bridge Domains
Configuring Spanning Tree Protocols
Configuring Integrated Bridging and Routing
Configuring DHCP Relay in a Bridge Domain VLAN Environment
Configuring DHCP Relay in a VPLS Routing Instance Environment
Configuring MX Series Router ATM Ethernet Interworking
Configuring a Bridge Network with Normalized VLAN Tags
Configuring a VPLS Network with Normalized VLAN Tags
Configuring One VPLS Instance for Several VLANs
Configuring VLAN Translation with a VLAN ID List
Configuring Multiple Bridge Domains with a VLAN ID List
Configuring VPLS Pseudowires with Dynamic Profiles—Basic
Configuring VPLS Pseudowires with Dynamic Profiles—Complex
Configuring Policing and Marking of Traffic Entering a VPLS Core
Configuring Filtering of Frames by MAC Address
Configuring Filtering of Frames by IEEE 802.1p Bits
Configuring Filtering of Frames by Packet Loss Priority
Configuring Ethernet CFM over VPLS
Configuring Ethernet CFM on Bridge Connections
Configuring Ethernet CFM on Physical Interfaces
Configuring One-Way ETH-DM with Single-Tagged Interfaces
Configuring Two-Way ETH-DM with Single-Tagged Interfaces
Configuring ETH-DM with Untagged Interfaces
Configuring Ethernet LFM Between PE and CE
Configuring Ethernet LFM for CCC
Configuring Ethernet LFM for Aggregated Ethernet
Configuring Ethernet LFM with Loopback Support
Configuring Ethernet Ring Protection for MX Series Routers
Example: Configuring Load Balancing Within Ethernet Ring Protection for MX Series Routers
Viewing Ethernet Ring Protection Status—Normal Ring Operation
Viewing Ethernet Ring Protection Status—Ring Failure Condition
[edit dynamic-profiles interfaces] Hierarchy Level
• dynamic-profiles
• family bridge
• interface-mode trunk
• interfaces $junos-interface-ifd-name
• unit $junos-underlying-interface-unit
• vlan-id
• vlan-id-list
• vlan-rewrite
• vlan-tags
[edit routing-instances] Hierarchy Level
• mesh-group
• neighbor
• protocols
• vpls
[edit forwarding-options dhcp-relay] Hierarchy Level
• dhcp-relay
• group
[edit interfaces] Hierarchy Level
• atm-options
• family
• inner-vlan-id-range
• l2circuit
• unit
• vci
• vci-range
• vlan-vci-tagging
• vpi (Define Virtual Path)
• vpi (Logical Interface and Interworking)
[edit firewall] Hierarchy Level
• family (bridge | vpls)
• filter
• firewall
• forwarding-class (Multifield Classifiers)
• hierarchical-policer
• if-exceeding (Policer)
• policer
• term
• three-color-policer
[edit bridge-domains] Hierarchy Level
• domain-type bridge
• bridge-domains
• input
• output
[edit protocols oam] Hierarchy Level
• auto-discovery
• connectivity-fault-management
• continuity-check
• direction
• ethernet
• hardware-assisted-timestamping
• hold-interval
• interface
• interval
• level
• maintenance-association
• maintenance-domain
• mep
• performance-monitoring
• priority
• action
• action-profile
• apply-action-profile
• event
• event-thresholds
• link-discovery
• link-fault-management
• negotiation-options
• oam
• pdu-interval
• pdu-threshold
• protocol-down
[edit protocols protection-group] Hierarchy Level
• control-channel
• data-channel
• east-interface
• ethernet-ring
• guard-interval
• node-id
• protection-group
• restore-interval
• ring-protection-link-end
• ring-protection-link-owner
• west-interface
show interfaces (10-Gigabit Ethernet)
show interfaces (Gigabit Ethernet)
show l2-learning instance
show route instance
clear dhcp relay binding
clear dhcp relay statistics
show dhcp relay binding
show dhcp relay statistics
show connections
show l2circuit connections
clear firewall
show firewall
show firewall log
show firewall prefix-action-stats
show policer
clear oam ethernet connectivity-fault-management statistics
monitor ethernet delay-measurement
show oam ethernet connectivity-fault-management delay-statistics
show oam ethernet connectivity-fault-management interfaces
show oam ethernet connectivity-fault-management mep-database
show oam ethernet connectivity-fault-management mep-statistics
clear oam ethernet link-fault-management state
clear oam ethernet link-fault-management statistics
show oam ethernet link-fault-management
clear protection-group ethernet-ring statistics
show protection-group ethernet-ring aps
show protection-group ethernet-ring data-channel
show protection-group ethernet-ring interface
show protection-group ethernet-ring node-state
show protection-group ethernet-ring statistics
show protection-group ethernet-ring vlan
http://kb.juniper.net/
