Tools and Parts Required to Replace the M320 Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required
 |
Note: If you have installed the cable cover, you must remove it before you can replace any hardware component or cable in the front of the chassis between the cable management system and the craft interface. To remove the cable cover, pull the lower tabs of the cover out of the slots of the lower cable guards, then pull the upper tabs of the cover out of the slots of the upper cable guards. To install the cable cover, insert the upper tabs of the cover into the slots of the upper cable guards, then insert the lower tabs of the cover into the slots of the lower cable guards (see Connecting PIC Cables to the M320 Router). |
