- Downloads
- neighbor
- Related Topics
- Configuring VPLS Routing Instances
neighbor
Syntax
neighbor neighbor-id {backup-neighbor {...}community community-name;encapsulation-type type;ignore-encapsulation-mismatch;pseudowire-status-tlv;psn-tunnel-endpoint address;switchover-delay milliseconds;}
Hierarchy Level
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],[edit routing-instances routing-instance-name protocols vpls]
Release Information
Statement introduced in JUNOS Release 8.4. The pseudowire-status-tlv option was added in JUNOS Release 10.0.
Description
Specify each of the PE routers participating in the VPLS domain. Configuring this statement enables LDP for signaling VPLS.
Options
neighbor-id—Specify the neighbor identifier for each PE router participating in the VPLS domain.
The other options are explained separately.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
