show multicast pim-to-igmp-proxy
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced in JUNOS Release 9.6.
Command introduced in JUNOS Release 9.6 for EX Series switches.
Description
Display configuration information about PIM-to-IGMP message translation, also known as PIM-to-IGMP proxy.
Options
- none
Display configuration information about PIM-to-IGMP message translation.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
List of Sample Output
show multicast pim-to-igmp-proxyOutput Fields
Table 42 describes the output fields for the show multicast pim-to-igmp-proxy command. Output fields are listed in the order in which they appear.
Table 42: show multicast pim-to-igmp-proxy Output Fields
Field Name | Field Description |
|---|---|
Proxy state | State of PIM-to-IGMP message translation, also known as PIM-to-IGMP proxy, on the configured upstream interfaces: enabled or disabled. |
interface-name | Name of upstream interface (no more than two allowed) on which PIM-to-IGMP message translation is configured. |
Sample Output
show multicast pim-to-igmp-proxy
user@host> show multicast pim-to-igmp-proxy Proxy state: enabled ge-0/1/0.1 ge-0/1/0.2
