show ldp interface
Syntax
Release Information
Command introduced before JUNOS Release 7.4.
Description
Display the status of Label Distribution Protocol (LDP)-enabled interfaces.
Options
- none
Display standard status information about all LDP-enabled interface for all routing instances.
- brief | detail | extensive
(Optional) Display the specified level of output.
- instance instance-name
(Optional) Display information for the specified routing instance.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
List of Sample Output
show ldp interface extensiveOutput Fields
Table 153 describes the output fields for the show ldp interface command. Output fields are listed in the approximate order in which they appear.
Table 153: show ldp interface Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
Interface | Interface name. | All levels |
Label space ID | Label space identifier that the router is advertising on the interface. | All levels |
Nbr count | Number of neighbors on the interface. | All levels |
Next hello | How long until the next hello packet is sent on this interface, in seconds. | All levels |
Hello interval | One-third of the negotiated hold time (in seconds). If the user-configured value for the hello interval is smaller than the computed value, the user-configured value is used. | detail extensive |
Hold time | Configured hold time, in seconds. | detail extensive |
Transport address | Address to which the neighbor wants the local route to establish the LDP session. | extensive |
Local hello interval | Locally configured hello interval. | extensive |
Sample Output
show ldp interface extensive
user@host> show ldp interface extensive Interface Label space ID Nbr count Next hello fe-0/0/3.0 10.255.245.6:0 2 0 Hello interval: 1, Hold time: 15, Transport address: 10.255.245.6 Local hello interval: 2, Index: 69