Juniper Networks® JUNOS® 10.2 Software
Release Notes
Release 10.2R1
28 May 2010
Revision 1
- JUNOS Software Release Notes for Juniper Networks M Series Multiservice Edge Routers, MX Series Ethernet Service Routers, and T Series Core Routers
- New Features in JUNOS Release 10.2 for M Series, MX Series, and T Series Routers
- Changes in Default Behavior and Syntax in JUNOS Release 10.2 for M Series, MX Series, and T Series Routers
- Issues in JUNOS Release 10.2 for M Series, MX Series, and T Series Routers
- Errata and Changes in Documentation for JUNOS Software Release 10.2 for M Series, MX Series, and T Series Routers
- Upgrade and Downgrade Instructions for JUNOS Release 10.2 for M Series, MX Series, and T Series Routers
- Basic Procedure for Upgrading to Release 10.2
- Upgrade Policy for JUNOS Software Extended End Of Life Releases
- Upgrading a Router with Redundant Routing Engines
- Upgrading Juniper Routers Running Draft-Rosen Multicast VPN to JUNOS Release 10.1
- Upgrading the Software for a Routing Matrix
- Upgrading Using ISSU
- Upgrading from JUNOS Release 9.2 or Earlier on a Router Enabled for Both PIM and NSR
- Downgrade from Release 10.2
- JUNOS Software Release Notes for Juniper Networks SRX Series Services Gateways and J Series Services Routers
- J Series Devices and SRX Series Branch Devices Support
- New Features in JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- Advertising Bandwidth for Neighbors on a Broadcast Link Support
- Group VPN Interoperability with Cisco’s GET VPN
- Changes in Default Behavior and Syntax in JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- Known Limitations in JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- [accounting-options] Hierarchy
- AppSecure
- AX411 Access Point
- Chassis Cluster
- Command-Line Interface (CLI)
- Dynamic VPN
- Flow and Processing
- Hardware
- Interfaces and Routing
- Intrusion Detection and Prevention (IDP)
- IPv6 Support
- J-Web
- NetScreen-Remote
- Network Address Translation (NAT)
- Performance
- Point-to-Point Protocol over Ethernet (PPPoE)
- Security
- SNMP
- Switching
- System
- Unified Threat Management (UTM)
- VPNs
- WLAN
- Issues in JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- Errata and Changes in Documentation for JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- Application Layer Gateways (ALGs)
- Command-Line Interface (CLI)
- Documentation for J Series and SRX Series Branch Devices
- Flow
- Hardware Documentation
- Installing Software Packages
- Integrated Convergence Services
- Interfaces and Routing
- Intrusion Detection and Prevention (IDP)
- JUNOS Software Interfaces and Routing Guide
- J-Web
- Screens
- Hardware Requirements for JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- Integrated Convergence Services
- Maximizing ALG Sessions
- Upgrade and Downgrade Instructions for JUNOS Release 10.2 for SRX Series Services Gateways and J Series Services Routers
- JUNOS Software Release Notes for EX Series Switches
- New Features in JUNOS Release 10.2 for EX Series Switches
- Changes in Default Behavior and Syntax in JUNOS Release 10.2 for EX Series Switches
- Limitations in JUNOS Release 10.2 for EX Series Switches
- Outstanding Issues in JUNOS Release 10.2 for EX Series Switches
- Resolved Issues in JUNOS Release 10.2 for EX Series Switches
- Errata in Documentation for JUNOS Release 10.2 for EX Series Switches
- Upgrade and Downgrade Issues for JUNOS Release 10.2 for EX Series Switches
- Upgrade Policy for JUNOS Software Extended End Of Life Releases
- Upgrading or Downgrading from JUNOS Release 9.4R1 for EX Series Switches
- Upgrading from JUNOS Release 9.3R1 to Release 10.2 for EX Series Switches
- Upgrading from JUNOS Release 9.2 to Release 10.2 for EX Series Switches
- Downgrading from JUNOS Release 10.2 to Release 9.2 for EX4200 Switches
- JUNOS Documentation and Release Notes
- Requesting Technical Support
- Revision History