Supported RSVP Standards
The JUNOS Software substantially supports the following RSVP standards.
Standards Track RFCs
- RFC 2205, Resource ReSerVation Protocol (RSVP)—Version 1 Functional Specification
- RFC 2210, The Use of RSVP with IETF Integrated Services
- RFC 2211, Specification of the Controlled-Load Network Element Service
- RFC 2212, Specification of Guaranteed Quality of Service
- RFC 2215, General Characterization Parameters for Integrated Service Network Elements
- RFC 2745, RSVP Diagnostic Messages
- RFC 2747, RSVP Cryptographic Authentication (updated by RFC 3097)
- RFC 2961, RSVP Refresh Overhead Reduction Extensions
- RFC 3097, RSVP Cryptographic Authentication—Updated Message Type Value (see also RFC 2747)
- RFC 3209, RSVP-TE: Extensions to RSVP for LSP Tunnels
The Null Service Object for maximum transmission unit (MTU) signaling in RSVP is not supported.
- RFC 3473, Generalized Multi-Protocol
Label Switching (GMPLS) Signaling Resource ReserVation [sic] Protocol-Traffic Engineering (RSVP-TE) Extensions
Only Section 9, “Fault Handling,” is supported.
- RFC 3477, Signalling Unnumbered Links in Resource ReSerVation Protocol - Traffic Engineering (RSVP-TE)
- RFC 4090, Fast Reroute Extensions to RSVP-TE for LSP Tunnels (except for node protection in facility backup)
- RFC 4561, Definition of a Record Route
Object (RRO) Node-Id Sub-Object
The RRO node ID subobject is for use in inter-AS link and node protection configurations.
Experimental RFCs
- RFC 4125, Maximum Allocation Bandwidth Constraints Model for Diffserv-aware MPLS Traffic Engineering
- RFC 4127, Russian Dolls Bandwidth Constraints Model for Diffserv-aware MPLS Traffic Engineering
Informational RFCs
- RFC 2209, Resource ReSerVation Protocol (RSVP)—Version 1 Message Processing Rules
- RFC 2216, Network Element Service Specification Template
Internet Draft
- Internet draft draft-ietf-mpls-rsvp-te-p2mp-01.txt, Extensions to RSVP-TE for Point to Multipoint TE LSPs (expires June 2005)
