Index of Statements and Commands
Symbols
- 802.3ad statement 1
A
- accept statement 1
- accept-source-mac statement 1
- access-concentrator statement 1
- access-profile statement 1
- accounting statement 1
- accounting-profile statement 1
- acfc statement 1
- acknowledge-retries statement 1
- acknowledge-timer statement 1
- action statement
- action-profile statement
- action-red-differential-delay statement 1
- activation-delay statement 1
- activation-priority statement 1
- address statement 1
- advertise-interval statement 1
- age statement 1
- agent-specifier statement
- PPPoE 1
- aggregate statement 1
- hierarchical policer 1
- aggregate-ports statement 1
- aggregated-ether-options statement 1
- aggregated-sonet-options statement 1
- alarm statement 1
- allow-any-vci statement 1
- allow-fragmentation statement 1
- allow-remote-loopback statement 1
- annex statement 1
- aps statement 1
- annex-b 1
- arp statement 1
- asynchronous-notification statement 1
- atm-encapsulation statement 1
- atm-options statement 1
- atm-scheduler-map statement 1
- authentication statement
- authentication-key statement 1
- authentication-profile-name statement 1
- authenticator statement 1
- auto-configure statement 1
- auto-discovery statement 1
- auto-negotiation statement
- auto-reconnect statement 1
B
- backup-destination statement 1
- backup-interface statement 1
- backup-options statement 1
- bandwidth statement 1
- bandwidth-limit statement
- bchannel-allocation statement 1
- bearer-bandwidth-limit statement 1
- bert-algorithm statement 1
- bert-error-rate statement 1
- bert-period statement 1
- bridge-domain statement 1
- broadcast statement 1
- buildout statement
- bundle statement 1
- burst-size-limit statement
- byte-encoding statement 1
- bytes statement 1
C
- callback statement 1
- callback-wait-period statement 1
- caller statement 1
- calling-number statement 1
- cbit-parity statement 1
- cbr statement 1
- cell-bundle-size statement 1
- chap statement 1
- chap-secret statement 1
- circuit-type statement
- cisco-interoperability statement 1
- classifier statement 1
- clear-dont-fragment-bit statement 1
- client statement 1
- clock-rate statement 1
- clocking statement 1
- clocking-mode statement 1
- compatibility-mode statement 1
- compression statement 1
- compression-device statement 1
- connections statement 1
- connectivity-fault-management statement 1
- container-devices statement 1
- device-count 1
- container-list statement 1
- container-options statement 1
- container-type statement 1
- continuity-check statement 1
- control-channel statement 1
- control-polarity statement 1
- control-signal statement 1
- copy-tos-to-outer-ip-header statement 1
- core-dump statement 1
- crc-major-alarm-threshold statement 1
- crc-minor-alarm-threshold statement 1
- cts statement 1
- cts-polarity statement 1
- current statement 1
D
- data-channel statement 1
- data-input statement 1
- dcd statement 1
- dcd-polarity statement 1
- dce statement 1
- dce-options statement 1
- deactivation-delay statement 1
- default-actions statement 1
- default-chap-secret statement 1
- default-pap-password statement 1
- delay statement
- PPPoE service name tables 1
- delimiter statement
- demux-destination statement 1, 2
- demux interfaces 1
- demux-options statement 1
- demux-source statement 1, 2
- demux interfaces 1
- demux0 statement 1
- description statement 1
- destination statement 1
- destination-class-usage statement 1
- destination-profile statement 1
- dial-options statement 1
- dial-string statement 1
- dialer statement 1
- dialer-options statement 1
- dialin statement 1
- direction statement 1
- disable statement 1
- link protection 1
- disable-mlppp-inner-ppp-pfc statement 1
- dlci statement 1
- do-not-fragment statement 1
- domain-name statement
- DHCP relay agent 1
- dot1x statement 1
- down-count statement 1
- drop statement
- PPPoE service name tables 1
- drop-timeout statement 1
- ds0-options statement 1
- dsl-options statement 1
- dsr statement 1
- dsr-polarity statement 1
- dte-options statement 1
- dtr statement 1
- dtr-circuit statement 1
- dtr-polarity statement 1
- dump-on-flow-control statement 1
- dynamic-call-admission-control statement 1
- dynamic-profile statement
E
- e1-options statement 1
- e3-options statement 1
- east-interface statement 1
- encapsulation statement 1
- encoding statement 1
- epd-threshold statement 1
- es-options statement 1
- ethernet statement 1
- ethernet-policer-profile statement 1
- ethernet-ring statement 1
- ethernet-switch-profile statement 1
- eui-64 statement 1
- evcs statement 1
- event statement 1
- event-thresholds statement 1
F
- f-max-period statement 1
- facility-override statement 1
- failover-delay statement 1
- family statement 1
- fastether-options statement 1
- fcs statement 1
- feac-loop-respond statement 1
- filter statement 1
- firewall
- hierarchical-policer 1
- flexible-vlan-tagging statement 1
- flow-control statement 1
- force statement 1
- forward-and-send-to-re 1
- forward-only 1
- forwarding-class statement 1
- fragment-threshold statement 1
- frame-error statement 1
- frame-period statement 1
- frame-period-summary statement 1
- framing statement 1
G
H
I
- idle-cycle-flag statement 1
- idle-timeout statement 1
- ieee802.1p statement 1
- if-exceeding statement
- hierarchical policer 1
- ignore statement 1
- ignore-all statement 1
- ignore-l3-incompletes statement 1
- ilmi statement 1
- ima-group-options statement 1
- ima-link-options statement 1
- inactivity-timeout statement 1
- incoming-called-number statement 1
- incoming-map statement 1
- indication statement 1
- indication-polarity statement 1
- ingress-rate-limit statement 1
- init-command-string statement 1
- initial-route-check statement 1
- inner-tag-protocol-id statement 1
- inner-vlan-id statement 1
- inner-vlan-id-range statement 1
- input statement 1
- input-list statement 1
- input-policer statement 1
- input-priority-map statement 1
- input-three-color statement 1
- input-vlan-map statement 1
- instance statement 1
- interface statement 1
- interface-down statement 1
- interface-mode statement 1
- interface-name statement
- interface-range statement 1
- interface-set statement 1
- interface-status-tlv statement 1
- interface-switch statement 1
- interface-type statement 1
- interfaces
- interface-range 1
- interfaces statement 1
- interleave-fragments statement 1
- interval statement 1
- inverse-arp statement 1
- invert-data statement 1
- ipsec-sa statement 1
- isdn-options statement 1
K
L
- l2tp-interface-id statement 1
- lacp statement
- layer2-policer statement 1
- lcp-max-conf-req statement 1
- lcp-restart-timer statement 1
- level statement 1
- line-encoding statement 1
- line-protocol statement 1
- line-rate statement 1
- linear-red-profile statement 1
- linear-red-profiles statement 1
- link-adjacency-loss statement 1
- link-discovery statement 1
- link-down statement 1
- link-event-rate statement 1
- link-fault-management statement 1
- link-layer-overhead statement 1
- link-mode statement 1
- link-protection statement 1
- link-speed statement 1
- linktrace statement 1
- lmi statement
- lmi-type statement 1
- load-interval statement 1
- load-threshold statement 1
- local-name statement 1
- local-password statement 1
- lockout statement 1
- log-prefix statement 1
- logical-interface-policer statement 1
- logical-systems statement 1
- long-buildout statement 1
- loop-timing statement 1
- loopback statement 1
- loopback-clear-timer statement 1
- loss-priority statement 1
- loss-threshold statement 1
- low-plp-max-threshold statement 1
- low-plp-threshold statement 1
- lowest-priority-defect statement 1
- lsq-failure-options statement 1
M
- mac statement 1
- mac-address statement 1
- mac-learn-enable statement 1
- mac-validate statement 1
- maintenance-association statement 1
- maintenance-domain statement 1
- master-only statement 1
- max-sessions statement
- PPPoE service name tables 1
- maximum-contexts statement 1
- maximum-requests statement 1
- maximum-vcs statement 1
- mc-ae statement 1
- member-interface-speed statement 1
- member-interface-type statement 1
- mep statement 1
- minimum-links statement 1
- mip-half-function statement 1
- mlfr-uni-nni-bundle-options statement 1
- mode statement 1
- modem-options statement 1
- monitor-session statement 1
- mpls statement
- mrru statement 1
- mtu statement 1
- multicast-dlci statement 1
- multicast-only statement 1
- multicast-statistics
- multicast-vci statement 1
- multilink-max-classes statement 1
- multipoint statement 1
- multipoint-destination statement 1
- multiservice-options statement 1
N
- n391 statement 1
- n392 statement 1
- n393 statement 1
- name-format statement 1
- native-vlan-id statement 1
- ncp-max-conf-req statement 1
- ncp-restart-timer statement 1
- negotiate-address statement 1
- negotiation-options statement 1
- neighbor statement 1
- no-allow-link-events statement 1
- no-asynchronous-notification statement 1
- no-auto-mdix statement 1
- no-auto-negotiation statement
- no-cbit-parity statement 1
- no-core-dump statement 1
- no-feac-loop-respond statement 1
- no-flow-control statement 1
- no-gratuitous-arp-reply statement 1
- no-gratuitous-arp-request statement 1
- no-keepalives statement 1
- no-long-buildout statement 1
- no-loop-timing statement 1
- no-loopback statement 1
- no-mac-learn-enable statement 1
- no-payload-scrambler statement 1
- no-redirects statement 1
- no-source-filtering statement 1
- no-syslog statement 1
- no-termination-request statement 1
- no-translate-discard-eligible statement 1
- no-translate-fecn-and-becn statement 1
- no-unframed statement 1
- no-z0-increment statement 1
- non-revertive statement 1
O
- oam statement 1
- oam-liveness statement 1
- oam-period statement 1
- oc-slice statement 1
- open-timeout statement 1
- operating-mode statement 1
- optics-options statement 1
- option-82 statement
- otn-options statement 1
- output statement 1
- output-list statement 1
- output-policer statement 1
- output-priority-map statement 1
- output-three-color statement 1
- output-vlan-map statement 1
- overflow statement 1
P
- pado-advertise statement
- PPPoE 1
- paired-group statement 1
- pap statement 1
- pap-password statement 1
- partition statement 1
- passive statement 1
- passive-monitor-mode statement 1
- password statement
- path-database-size statement 1
- path-trace statement 1
- payload-scrambler statement 1
- payload-size statement 1
- pdu-interval statement 1
- pdu-threshold statement 1
- peer-unit statement 1
- per-unit-scheduler statement 1
- performance-monitoring statement 1
- periodic statement 1
- pfc statement 1
- pic-type statement 1
- plp-to-clp statement 1
- plp1 statement 1
- point-to-point statement 1
- policer
- interface 1
- policer statement
- pool statement 1
- pop statement
- Gigabit Ethernet IQ interfaces 1
- pop-all-labels statement 1
- pop-pop statement
- Gigabit Ethernet IQ interfaces 1
- pop-swap statement
- Gigabit Ethernet IQ interfaces 1
- port statement
- voice services 1
- port-priority statement
- LACP 1
- port-status-tlv statement 1
- post-service-filter statement 1
- ppp-options statement 1
- pppoe-options statement 1
- pppoe-underlying-options statement
- PPPoE 1
- preferred statement 1
- preferred-source-address statement 1
- premium
- policer 1
- premium statement
- preserve-interface statement 1
- primary statement 1
- priority
- schedulers 1
- priority statement 1
- OAM connectivity-fault management 1
- promiscuous-mode statement 1
- protect-circuit statement 1
- protection-group statement 1
- protocol-down statement 1
- protocols statement 1
- proxy statement 1
- proxy-arp statement 1
- push statement
- Gigabit Ethernet IQ interfaces 1
- push-push statement
- Gigabit Ethernet IQ interfaces 1
Q
R
- radius-realm statement
- ranges statement
- rate statement 1
- reassemble-packets statement 1
- reauthentication statement 1
- receive-bucket statement 1
- receive-options-packets statement 1
- receive-ttl-exceeded statement 1
- red-differential-delay statement 1
- redial-delay statement 1
- redundancy-options statement 1
- remote statement 1
- remote-loopback statement 1
- remote-loopback-respond statement 1
- remote-mep statement 1
- request statement 1
- required-depth statement 1
- retries statement 1
- revert-time statement 1
- revertive statement 1
- rfc-2615 statement 1
- ring-protection-link-end statement 1
- ring-protection-link-owner statement 1
- routing-instance statement 1
- PPPoE service name tables 1
- rpf-check statement 1
- rtp statement 1
- rts statement 1
- rts-polarity statement 1
- rtvbr statement 1
S
- sampling statement 1
- satop-options statement 1
- scheduler-maps statement 1
- schedulers statement 1
- secondary statement 1
- send-critical-event statement 1
- serial-options statement 1
- server statement 1
- server-timeout statement 1
- service statement 1
- service-domain statement 1
- service-filter statement 1
- service-name statement 1
- service-name-table statement
- PPPoE underlying interface 1
- service-name-tables statement
- PPPoE 1
- service-set statement 1
- services statement 1
- services-options statement 1
- shaping statement 1
- shdsl-options statement 1
- short-name-format statement 1
- short-sequence statement 1
- snext statement 1
- snr-margin statement 1
- sonet-options statement 1
- source statement 1
- source-address-filter statement 1
- source-class-usage statement 1
- source-filtering statement 1
- speed statement
- spid1 statement 1
- spid2 statement 1
- stacked-vlan-ranges statement 1
- stacked-vlan-tagging statement 1
- start-end-flag statement 1
- static-interface statement
- PPPoE 1
- static-tei-val statement 1
- subscriber interface statements
- access-concentrator 1
- supplicant statement
- single (mode) 1
- supplicant-timeout statement 1
- swap statement
- Gigabit Ethernet IQ interfaces 1
- swap-push statement
- Gigabit Ethernet IQ interfaces 1
- swap-swap statement
- Gigabit Ethernet IQ interfaces 1
- switch-options statement 1
- switch-port statement
- access switching 1
- switch-type statement 1
- switching-mode statement 1
- symbol-period statement 1
- syslog statement 1
- system-priority statement
- LACP 1
T
- t1-options statement 1
- t3-options statement 1
- t310 statement 1
- t391 statement 1
- t392 statement 1
- tag-protocol-id statement 1
- targeted-broadcast statement 1
- tei-option statement 1
- terminate statement
- PPPoE service name tables 1
- then statement
- hierarchical policer 1
- threshold statement 1
- timeslots statement 1
- tm statement 1
- tm-polarity statement 1
- traceoptions statement 1
- translate-discard-eligible statement 1
- translate-fecn-and-becn statement 1
- transmit-bucket statement 1
- transmit-clock statement 1
- transmit-period statement 1
- transmit-weight statement 1
- traps statement 1
- trigger statement 1
- trigger-link-failure statement 1
- trunk-bandwidth statement 1
- trunk-id statement 1
- ttl statement 1
- tunnel statement 1
U
V
- vbr statement 1
- vc-cos-mode statement 1
- vci statement 1
- vci-range statement 1
- virtual-switch statement 1
- vlan-id statement 1
- vlan-id-list 1
- vlan-id-list statement
- vlan-id-range statement 1
- vlan-ranges statement 1
- vlan-rewrite statement 1
- vlan-tagging statement 1
- vlan-tags statement
- vlan-tags-outer statement 1
- vlan-vci-tagging statement 1
- vpi statement 1
- vtmapping statement 1
W
Y
- yellow-differential-delay statement 1
Z
- z0-increment statement 1