Subscriber access supports the configuration of the Router Advertisement Protocol at the [edit dynamic-profiles profile-name protocols] hierarchy level. Statements configured at this hierarchy level are identical in function to those same statements used for static Router Advertisement Protocol configuration, with the exception of the interface and prefix statements which use dynamic variables.

For general information about configuring the Router Advertisement Protocol, see the JUNOS Routing Protocols Configuration Guide.

Dynamic Router Advertisement Configuration Overview

For general information about configuring Dynamic Router Advertisement, see the JUNOS Routing Protocols Configuration Guide.

Configuration for Dynamic Router Advertisement are identical to that perform for static Router Advertisement interfaces, as described in conjunction with configuring Neighbor Discovery, with the exception of their being configured at the [edit dynamic-profiles profile-name protocols router-advertisement] hierarchy level. For specific Router Advertisement configuration tasks, see the JUNOS Routing Protocols Configuration Guide.

Only the Dynamic Router Advertisement configuration statements listed on this page are available at the [edit dynamic-profiles profile-name protocols router-advertisement] hierarchy level.

[edit dynamic-profiles profile-name protocols] Hierarchy Level

autonomous

current-hop-limit

default-lifetime

interface

managed-configuration

max-advertisement-interval

min-advertisement-interval

on-link

other-stateful-configuration

preferred-lifetime

prefix

protocols (Dynamic Profiles)

reachable-time

retransmit-timer

router-advertisement

valid-lifetime

clear ipv6 router-advertisement

show ipv6 router-advertisement

Collecting Subscriber Access Logs Before Contacting Juniper Technical Support

http://kb.juniper.net/