EX Series Switch Software Features Overview
High Availability Features for EX Series Switches Overview
EX Series Switches Interfaces Overview
Understanding Interface Naming Conventions on EX Series Switches
Understanding Aggregated Ethernet Interfaces and LACP
Understanding Layer 3 Subinterfaces
Understanding Unicast RPF for EX Series Switches
PoE and EX Series Switches Overview
Understanding IP Directed Broadcast for EX Series Switches
Understanding Interface Ranges on EX Series Switches
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
Example: Configuring Layer 3 Subinterfaces for a Distribution Switch and an Access Switch
Example: Configuring Unicast RPF on an EX Series Switch
Example: Configuring PoE Interfaces on an EX Series Switch
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
Example: Configuring IP Directed Broadcast on an EX Series Switch
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
Configuring Aggregated Ethernet Interfaces (CLI Procedure)
Configuring Aggregated Ethernet Interfaces (J-Web Procedure)
Configuring Aggregated Ethernet LACP (CLI Procedure)
Configuring a Layer 3 Subinterface (CLI Procedure)
Configuring Unicast RPF (CLI Procedure)
Disabling Unicast RPF (CLI Procedure)
Configuring PoE (CLI Procedure)
Configuring PoE (J-Web Procedure)
Configuring IP Directed Broadcast (CLI Procedure)
Setting the Mode on an SFP+ Uplink Module (CLI Procedure)
[edit chassis] Configuration Statement Hierarchy
[edit interfaces] Configuration Statement Hierarchy
[edit poe] Configuration Statement Hierarchy
802.3ad
aggregated-devices
aggregated-ether-options
auto-negotiation
chassis
description
device-count
disable
duration
ether-options
ethernet (for aggregated devices)
family
filter
flow-control
force-up
guard-band
interface (for PoE)
interface-range
interfaces
interval
lacp
link-mode
management
maximum-power
member
member-range
members
mtu
native-vlan-id
periodic
port-mode
priority
rpf-check
speed
targeted-broadcast
telemetries
unit
vlan
vlan-id
vlan-tagging
Monitoring Interface Status and Traffic
Verifying the Status of a LAG Interface
Verifying That LACP Is Configured Correctly and Bundle Members Are Exchanging LACP Protocol Packets
Verifying That Layer 3 Subinterfaces Are Working
Verifying Unicast RPF Status
Verifying Status of PoE Interfaces on an EX Series Switch
Monitoring PoE
monitor interface
show interfaces diagnostics optics
show interfaces ge- (for Gigabit Ethernet interfaces)
show interfaces xe- (for 10-Gigabit Ethernet interfaces)
show interfaces queue
show lacp interfaces
show poe controller
show poe interface
show poe telemetries interface
test interface restart-auto-negotiation
http://kb.juniper.net/
Troubleshooting an Aggregated Ethernet Interface
Troubleshooting Network Interfaces on EX3200 and EX4200 Switches
Troubleshooting Uplink Module Installation or Replacement on EX3200 and EX4200 Switches
Port Role Configuration with the J-Web Interface (with CLI References)
Troubleshooting Interface Configuration and Cable Faults
Troubleshooting Unicast RPF
