Viewing Physical Interfaces for Devices
Junos Space displays physical interfaces by device name, based on the device information Junos Space has in its database. You can view the operational status and admin status of physical interfaces for one or more devices to troubleshoot problems.
Sorting is disabled for the physical interfaces view to preserve the natural slot order of the devices.
If the interface status changes on the managed device, the data is not updated in Junos Space until the device is resynchronized with the Junos Space database.
To view the physical interfaces for devices:
- From the task ribbon, select the Devices workspace.
- From the task ribbon, select the Manage Devices icon.
- In the Manage Device inventory view, select the device for which you want to view the physical interfaces.
- In the Actions drawer, click View Interfaces.
Junos Space displays the status of the physical interfaces for a device.
Table 1 describes the information displayed for the physical Interfaces.
Table 1: Physical Interfaces Columns
Field Description Admin Status
Admin status of the interface: up or down.
Device Name
Device configuration name.
Encapsulation
Encapsulation used on the physical interface.
Interface Name
Standard information about the interface, in the format type-/fpc/pic/port where type is the media type that identifies the network device; for example, ge-0/0/6.
IP Address
IP address for the interface.
Link Type
Physical interface link type: full duplex or half duplex.
MTU
Maximum transmission unit size on the physical interface.
Operational Status
Operational status of the interface: up or down.
Speed (Mbps)
Speed at which the interface is running.
- To return to the device inventory, click Return to Inventory View at the top of the inventory panel.
