• Downloads
• members    

• Related Topics
• show ethernet-switching interfaces
• show vlans
• Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch
• Example: Connecting an Access Switch to a Distribution Switch
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Configuring Gigabit Ethernet Interfaces (J-Web Procedure)
• Creating a Series of Tagged VLANs (CLI Procedure)
• Understanding Bridging and VLANs on EX Series Switches
• JUNOS Software Network Interfaces Configuration Guide at http://www.juniper.net/techpubs/software/junos/junos96/index.html

members

Syntax

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 9.0 for EX Series switches.

Statement updated with enhanced ? (CLI completion feature) functionality in JUNOS Release 9.5 for EX Series switches.

Description

For trunk interfaces, configure the VLANs for which the interface can carry traffic.

Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range.

Options

all—Specifies that this trunk interface is a member of all the VLANs that are configured on this switch. When a new VLAN is configured on the switch, this trunk interface automatically becomes a member of the VLAN.

Note: Each VLAN that is configured must have a specified VLAN ID when you attempt to commit the configuration; otherwise, the configuration commit fails. Also, all cannot be the name of a VLAN on the switch.

names—Name of one or more VLANs.

vlan-ids—Numeric identifier of one or more VLANs. For a series of tagged VLANs, specify a range; for example, 10-20 or 10-20 23 27-30.

Required Privilege Level

interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.