- Downloads
- if-exceeding
- Related Topics
- Configuring Rate Limiting
if-exceeding
Syntax
if-exceeding {bandwidth-limit bps;bandwidth-percent number;burst-size-limit bytes;}
Hierarchy Level
Release Information
Statement introduced before JUNOS Release 7.4.
Logical systems support introduced in JUNOS Release 9.3.
Description
Configure policer rate limits.
Options
bandwidth-limit bps—Traffic rate, in bits per second (bps). Any value below 61,040 bps results in an effective rate of 30,520 bps.
- Range: 8000 through 40,000,000,000 bps
- Range: 32,000 through 40,000,000,000 bps
- Default: None
bandwidth-percent number—Port speed, in decimal percentage number.
- Range: 1 through 100
- Default: None
burst-size-limit bytes—Maximum burst size. The minimum recommended value is the maximum transmission unit (MTU) of the IP packets being policed.
- Range: 1500 through 100,000,000,000 bytes
- Default: None
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
