request mpls lsp adjust-autobandwidth

Syntax

Syntax (EX Series Switch)

Release Information

Command introduced before JUNOS Release 7.4.

Command introduced in JUNOS Release 9.5 for EX Series switches.

Description

Manually trigger a bandwidth allocation adjustment for active label-switched paths (LSPs).

Options

none

Manually trigger a bandwidth allocation adjustment for all active LSP paths.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

name lsp-name

(Optional) Manually trigger a bandwidth allocation adjustment on the specified LSP only.

Additional Information

For this command to work properly, the following conditions must exist:

• Automatic bandwidth allocation must be enabled on the LSP. The parameters for adjustment interval and maximum average bandwidth are not reset after you issue the request mpls lsp adjust-autobandwidth command.
• The difference between the adjusted bandwidth and the current LSP path bandwidth must be greater than the threshold limit.

Required Privilege Level

maintenance

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output