show ripng neighbor

Syntax

show ripng neighbor<logical-system (all | logical-system-name)><name>

Syntax (EX Series Switch)

show ripng neighbor<name>

Release Information

Command introduced before JUNOS Release 7.4.

Command introduced in JUNOS Release 9.0 for EX Series switches.

Description

Display information about Routing Information Protocol next-generation (RIPng) neighbors.

Options

none: Display information about all RIPng neighbors.
logical-system (all | logical-system-name): (Optional) Perform this operation on all logical systems or on a particular logical system.
name: (Optional) Display detailed information about a specific RIPng neighbor.

Required Privilege Level

view

List of Sample Output

show ripng neighbor

Output Fields

Table 134 lists the output fields for the show ripng neighbor command. Output fields are listed in the approximate order in which they appear.

Table 134: show ripng neighbor Output Fields

Field Name	Field Description
Neighbor	Name of RIPng neighbor.
State	State of the connection: Up or Dn (Down).
Source Address	Source address.
Destination Address	Destination address.
Send Mode	Send options: broadcast, multicast, none, version 1, or yes.
Receive Mode	Type of packets to accept: both, none, version 1, or yes.
In Met	Metric added to incoming routes when advertising into RIPng routes that were learned from other protocols.

Sample Output

show ripng neighbor

user@host> show ripng neighbor

                    Source                           Dest               In
Neighbor     State  Address                          Address  Send Recv Met
--------     -----  -------                          -------  ---- ---- ---
fe-0/0/2.0      Up  fe80::290:69ff:fe68:b002         ff02::9  yes  yes    1