Changes in Default Behavior and Syntax in JUNOS Release 10.1 for EX Series Switches

The following changes in system behavior, configuration statement usage, or operational mode command usage have occurred since the previous release and might not yet be documented in the JUNOS Software for EX Series switches documentation:

Layer 2 and Layer 3 Protocols

• EX Series switches now support the show multicast rpf instance instance-name command.
• The iso option is not available in the show pfe route command because it is not supported on EX Series switches.

Infrastructure

• On EX Series switches, the sip-server statement in the [edit system services dhcp] hierarchy is now supported, allowing explicit configuration of SIP server addresses for DHCP servers.

User Interface and Configuration

• On EX3200 switches and EX4200 switches, the request system power-off other-routing-engine command and the request system power-off both-routing-engines command are disabled.
• The output of the show chassis hardware command for EX3200 switches and EX4200 switches has been changed. The Description field in the output now displays SFP-100-LX40 for the 100Base-LH interface and SFP-100-LH for the 100Base-ZX interface.
• If you enable PIM on all interfaces using the interface all command, it is not enabled on the me0 and vme interfaces by default. Therefore you do not need to explicitly disable PIM on the management interfaces. Previously, enabling PIM on all interfaces caused it to be enabled on these management interfaces.

Related Topics

• New Features in JUNOS Release 10.1 for EX Series Switches
• Limitations in JUNOS Release 10.1 for EX Series Switches
• Outstanding Issues in JUNOS Release 10.1 for EX Series Switches
• Resolved Issues in JUNOS Release 10.1 for EX Series Switches
• Errata in Documentation for JUNOS Release 10.1 for EX Series Switches
• Upgrade and Downgrade Issues for JUNOS Release 10.1 for EX Series Switches