Supported IS-IS Standards
The JUNOS Software substantially supports the following IS-IS standards.
- International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 8473, Information technology — Protocol for providing the connectionless-mode network service
- ISO/IEC 10589, Information technology — Telecommunications and information exchange between systems — Intermediate System to Intermediate System intra-domain routeing [sic] information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
- RFC 1195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
- RFC 2973, IS-IS Mesh Groups
- RFC 3787, Recommendations for Interoperable IP Networks using Intermediate System to Intermediate System (IS-IS)
- RFC 5120, M-ISIS: Multi Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)
- RFC 5130, A Policy Control Mechanism in IS-IS Using Administrative Tags
- RFC 5301, Dynamic Hostname Exchange Mechanism for IS-IS
- RFC 5302, Domain-wide Prefix Distribution with Two-Level IS-IS
- RFC 5303, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
- RFC 5304, IS-IS Cryptographic Authentication
- RFC 5305, IS-IS Extensions for Traffic Engineering
- RFC 5306, Restart Signaling for IS-IS
- RFC 5307, IS-IS Extensions in Support of Generalized Multi-Protocol [sic] Label Switching (GMPLS)
- RFC 5308, Routing IPv6 with IS-IS
- RFC 5309, Point-to-Point Operation over LAN in Link State Routing Protocols
- Internet
draft draft-ietf-bfd-base-09.txt, Bidirectional Forwarding
Detection
Transmission of echo packets is not supported.
- Internet draft draft-ietf-isis-wg-255adj-02.txt, Maintaining more than 255 circuits in IS-IS
