Router Chassis Configuration Guidelines
This chapter covers the following topics:
- Router Chassis Configuration Statements
- Configuring the JUNOS Software to Make a Flexible PIC Concentrator Stay Offline
- Configuring the JUNOS Software to Make an SFM Stay Offline
- Configuring the JUNOS Software for Supporting Aggregated Devices
- Configuring the JUNOS Software to Use ATM Cell-Relay Accumulation Mode on an ATM1 PIC
- Configuring Port-Mirroring Instances
- Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs for MX Series Routers
- Examples: Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs on MX Series Routers
- Configuring ECMP Next Hops for RSVP and LDP LSPs for Load Balancing
- 16-Port 10-Gigabit Ethernet MPC on MX Series Routers (16x10GE 3D MPC) Overview
- Configuring the Number of Active Ports on a 16-Port 10-Gigabit Ethernet MPC on MX Series Routers
- Configuring Tunnel Interfaces on an MX Series Router with a 16x10GE 3D MPC
- Configuring the Power-On Sequence for DPCs on MX Series Routers with the Enhanced AC PEM
- Configuring the JUNOS Software to Determine the Conditions That Trigger Alarms
- Configuring the JUNOS Software to Enable Service Packages on Adaptive Services Interfaces
- Configuring the JUNOS Software to Support Layer 2 Services on MX Series Ethernet Services Routers with MS-DPCs
- Configuring the JUNOS Software to Enable Session Offloading on MX Series Ethernet Services Routers with MS-DPCs
- Configuring the JUNOS Software to Enable SONET/SDH Framing for SONET/SDH PICs
- Configuring the JUNOS Software to Support an External Clock Synchronization Interface for the M320, M40e, and M120 Routers
- Configuring the JUNOS Software to Support the Sparse DLCI Mode on Channelized STM1 or Channelized DS3 PICs
- Configuring the JUNOS Software to Enable a SONET PIC to Operate in Channelized (Multiplexed) Mode
- Configuring Channelized DS3-to-DS0 Naming
- Configuring the JUNOS Software to Support Eight Queues on IQ Interfaces for T Series and M320 Routers
- Configuring Channel Groups and Time Slots for a Channelized E1 Interface
- Configuring the JUNOS Software to Support Channelized STM1 Interface Virtual Tributary Mapping
- Configuring the JUNOS Software to Enable ATM2 Intelligent Queuing Layer 2 Circuit Transport Mode
- Configuring the JUNOS Software to Support ILMI for Cell Relay Encapsulation on an ATM2 IQ PIC
- Configuring the JUNOS Software to Support Tunnel Interfaces on MX Series Ethernet Services Routers
- Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC
- Example: Configuring Tunnel Interfaces on a 10-Gigabit Ethernet 4-Port DPC
- Configuring the JUNOS Software to Enable an M160 Router to Operate in Packet Scheduling Mode
- Configuring the JUNOS Software to Allocate More Memory for Routing Tables
- Configuring the Link Services PIC for Multilink Protocol Support
- Configuring the JUNOS Software to Enable Idle Cell Format and Payload Patterns for ATM Devices
- Configuring the JUNOS Software to Enable MTU Path Check for a Routing Instance on M Series Routers
- Configuring the JUNOS Software to Support Redundancy on Routers Having Multiple Routing Engines or Switching Boards
- Configuring the JUNOS Software to Support FPC to FEB Connectivity on M120 Routers
- Configuring the JUNOS Software to Enable a Routing Engine to Reboot on Hard Disk Errors
- Configuring the JUNOS Software to Prevent the Resetting of the Factory Default or Rescue Configuration During Current Configuration Failure on J Series Routers
- Configuring Larger Delay Buffers to Prevent Congestion And Packet Dropping
- Configuring the JUNOS Software to Support Entry-Level Configuration on an M320 Router with a Minimum Number of SIBs and PIMs
- Configuring the uPIM to Run in Switching or Routing Mode on J Series Routers
- Configuring the IP and Ethernet Services Mode in MX Series Routers
- Configuring J Series Services Router Switching Interfaces
- Example: Configuring J Series Services Router Switching Interfaces
- TX Matrix Router and T640 Router Configuration Guidelines
- TX Matrix Plus Router and T1600 Router Configuration Guidelines
- Configuring the JUNOS Software to Upgrade the T1600 Router Chassis to LCC0 of a TX Matrix Plus Routing Platform
- Associating Sampling Instances for Active Flow Monitoring with a Specific Packet Forwarding Engine
