Assigning a Service to a Service Name Table and Configuring the Action Taken When the Client Request Includes a Non-zero Service Name Tag
You can specify up to 16 service names for each PPPoE service name table. You can optionally configure the action taken by the PPPoE underlying interface when it receives a PADI packet that includes a service name (service name tag).
To indicate that it can service the client request, the interface returns a PADO packet in response to the PADI. By default, the interface immediately responds to the request; this is the terminate action. You can specify that the PADI packet is ignored (dropped), or you can set a delay between receipt of the PADI packet and transmission of the PADO packet.
(Optional) To configure a service for the service name table, do one of the following:
- Assign a service name to the table. The terminate action
is applied to the service by default.[edit protocols pppoe service-name-tables table1]user@host# set service gold-service
- Specify the action taken for a service in response to
a PADI packet from a PPPoE client.[edit protocols pppoe service-name-tables table1]user@host# set service gold-service delay 25
