Configuring the ATM PIC Type

For ATM1 and ATM2 IQ interfaces, the JUNOS Software does not determine from the interface name at- fpc/pic/port whether your router has an ATM1 or ATM2 IQ PIC installed. You can configure the PIC type as ATM1 or ATM2 IQ by including the pic-type statement at the [edit interfaces interface-name atm-options] hierarchy level:

[edit interfaces interface-name atm-options]pic-type (atm1 | atm2);

The following guidelines apply to configuring the ATM PIC type:

If you include the pic-type statement in the configuration, and you include other statements at the [edit interfaces interface-name atm-options] hierarchy level that do not match the configured PIC type, the configuration does not commit. For example, you cannot commit a configuration that includes the pic-type atm2 statement and the maximum-vcs statement.
If you do not include the pic-type statement and you do include the maximum-vcs statement in the configuration, the JUNOS Software assumes you are configuring an ATM1 interface, and sets the PIC type option accordingly. If you do not include the maximum-vcs statement in the configuration, the JUNOS Software assumes you are configuring an ATM2 IQ interface, and sets the PIC type option accordingly.
If you include the promiscuous-mode statement in the configuration of an ATM2 interface, you must also include the pic-type atm2 statement.

Example: Configuring the ATM PIC Type

Configure the PIC type on an ATM1 and an ATM2 interface.

On an ATM1 Interface

[edit interfaces]at-1/0/0 {atm-options {pic-type atm1;vpi 0 maximum-vcs 256;vpi 1 maximum-vcs 512;}...}

On an ATM2 IQ Interface

[edit interfaces]at-1/1/0 {atm-options {pic-type atm2;vpi 0;vpi 2 {oam-period 6;}}...}