2-Port 10 Gigabit Ethernet XPIM Components
The 2-Port 10 Gigabit Ethernet XPIM contains the components listed in Table 1.
Table 1: 2-Port 10 Gigabit Ethernet XPIM Components
Component | Location | Description |
|---|---|---|
XPIM ONLINE/OFFLINE button GPIMs/XPIMs are Online Insertion and Removal (OIR) capable. | Right side of the XPIM | Use the XPIM ONLINE/OFFLINE button to gracefully shut down the XPIM. |
Two groups of ports labeled 0 and 1, where each group contains 1 copper port and 1 fiber port. Note: By default, all ports are autonegotiation and flow control enabled, and support link speed of 10 G in full-duplex mode. Use the fiber ports to connect various SFP+ transceivers for fiber cable connections. See Table 2 for supported SFP+ transceivers. | Middle of the XPIM |
|
Captive screws | One on each side of the XPIM | Use the captive screws to hold the XPIM in place. |
You can customize the Ethernet interface type by using different SFP+ transceivers. Table 2 shows the available SFP+ transceivers.
 | Note: We strongly recommend the use of Juniper Networks SFP and XFP transceivers. We cannot guarantee correct operation if other transceivers are used. The transceiver type can be different in each port, as long as a supported part number is used. |
Table 2: 2-Port 10 Gigabit Ethernet XPIM SFP+ Transceivers
Product Number | Interface Type | Connector |
|---|---|---|
SFPP-10GE-SR | 10GBase-SR Ethernet optical transceiver SFP, 26 m reach | LC |
SFPP-10GE-LR | 10GBase-LR Ethernet optical transceiver SFP, 10 Km reach | LC |
SFPP-10GE-ER | 10GBase-ER Ethernet optical transceiver SFP, 40 Km reach | LC |
SFPP-10GE-LRM | 10GBase-LRM Ethernet optical transceiver SFP, 220 m reach | LC |
Copper Twin-AX 1m | 10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach | Cable connector with 1 m cable length |
Copper Twin-AX 3m | 10GE Ethernet cable assembly plugs into SFP+ socket, 15 m reach | Cable connector with 3 m cable length |
