Software release

• JUNOS 8.4 and later

Description

• 40 Gigabit Ethernet ports
• Power requirement: 6.98 A @ 48 V (335 W)
• Weight: 13.1 lb (5.9 kg)
• Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network
• Model number: DPCE-R-40GE-SFP

Hardware features

• High-performance throughput on each port at speeds up to 1 Gbps
• Autonegotiation between Gigabit Ethernet circuit partners
• Full-duplex mode
• Maximum transmission units (MTUs) of up to 9192 bytes
• Enhanced ASICs for increased performance and scalability of Layer 2 features

Software features

• Optical diagnostics and related alarms
• See Protocols and Applications Supported by MX Series DPCs and Enhanced DPCs (DPC and DPCE-R) for information about the protocols and applications that this DPC supports.

Cables and connectors

• You can install any transceiver supported by the DPC. For information about installing and removing transceivers, see the hardware guide for your router.
• Duplex LC/PC connector (Rx and Tx)
• Small form-factor pluggable (SFP) transceivers:
  • 1000BASE-EX (model number: SFP-GE40KM)
  • 1000BASE-LH (model number: SFP-1GE-LH)
  • 1000BASE-LX (model number: SFP-1GE-LX)
  • 1000BASE-SX (model number: SFP-1GE-SX)
  • 1000BASE-T (model number: SFP-1-GE-T)

  Interface specifications—see 10Base, 100Base, and 1000Base Transceiver Optical Interface Specifications

• Bidirectional small form-factor pluggable (SFP) transceivers:
  • 1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13, SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13)

  Optical interface specifications—see Bidirectional SFP Optical Interface Specifications

Note: Do not install Gigabit Ethernet SFPs in the SONET/SDH port. The port will not recognize the SFP.

LEDs

OK/FAIL LED, one bicolor:

• Steady green—DPC is functioning normally.
• Blinking green—DPC is transitioning online or offline.
• Red—DPC has failed.

Link LED, one green per port:

• Off—No link.
• On steadily—Link is active.

The Link LEDs are labeled in groups of five:

• 0/0 for 0/0 through 0/4
• 0/5 for 0/5 through 0/9
• 1/0 for 1/0 through 1/4
• 1/5 for 1/5 through 1/9
• 2/0 for 2/0 through 2/4
• 2/5 for 2/5 through 2/9
• 3/0 for 3/0 through 3/4
• 3/5 for 3/5 through 3/9