• Downloads
• Configuring Virtual Interfaces    

Configuring Virtual Interfaces

The virtual interface configuration determines the NAT pool (media service) for calls to use.

To configure a virtual interface:

1. Create a virtual interface, and assign the number 0 to the interface.
   [edit services pgcp]user@host#edit virtual-interface 0
2. Specify the name of the media service that contains the NAT pool to be used for gates on the virtual interface that you are configuring.
   [edit services pgcp virtual-interface 0]user@host#set media-service media-service-one
3. Set the virtual interface to in service.
   [edit services pgcp virtual-interface 0]user@host#set service-state in-service