vlan
Syntax
- vlan (vlan-id | vlan-name) {
-
- data-forwarding {
-
-
- receiver {
- source-vlans vlan-list;
- install ;
- }
- }
-
- disable {
- interface interface-name;
- }
- immediate-leave;
-
- interface interface-name {
- group-limit limit;
- multicast-router-interface;
-
- }
- proxy ;
- query-interval seconds;
- query-last-member-interval seconds;
- query-response-interval seconds;
- robust-count number;
- }
Hierarchy Level
- [edit protocols igmp-snooping]
Release Information
Statement introduced in JUNOS Release 9.1 for EX Series switches.
Statement updated with enhanced ? (CLI completion feature) functionality in JUNOS Release 9.5 for EX Series switches.
Description
Configure IGMP snooping parameters for a VLAN.
The remaining statements are explained separately.
![]() |
Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range. For IGMP snooping, secondary private VLANs are not listed. |
Default
IGMP snooping options apply to the specified VLAN.
Options
-
vlan-id—Numeric tag for a VLAN.
- Range: 0 through 4095. Tags 0 and 4095 are reserved by JUNOS Software, and you should not configure them.
-
vlan-name—Name of a VLAN.
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement
to the configuration.


