• Downloads
• layer2-protocol-tunneling    

• Related Topics
• show ethernet-switching layer2-protocol-tunneling interface
• show ethernet-switching layer2-protocol-tunneling statistics
• show ethernet-switching layer2-protocol-tunneling vlan
• Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches
• Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure)

layer2-protocol-tunneling

Syntax

Hierarchy Level

Release Information

Statement introduced in JUNOS Release 10.0 for EX Series switches.

Description

Enable Layer 2 protocol tunneling (L2PT) on the VLAN.

The remaining statements are explained separately.

Default

L2PT is not enabled.

Options

all—Enable all supported Layer 2 protocols.

protocol-name—Name of the Layer 2 protocol. Values are:

• 802.1x—IEEE 802.1x authentication
• 802.3ah—IEEE 802.3ah Operation, Administration, and Maintenance (OAM) Link Fault Management (LFM)

  Note: If you enable L2PT for untagged LFM packets, do not configure LFM on the corresponding access interface.

• cdp—Cisco Discovery Protocol
• e-lmi—Ethernet Local Management Interface
• gvrp—GARP VLAN Registration Protocol
• lacp—Link Aggregation Control Protocol

  Note: If you enable L2PT for untagged LACP packets, do not configure LACP on the corresponding access interface.

• llpd—Link Layer Discovery Protocol
• mmrp—Multiple MAC Registration Protocol
• mvrp—Multiple VLAN Registration Protocol
• stp—Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol
• vstp—VLAN Spanning Tree Protocol
• vtp—VLAN Trunking Protocol

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.