bandwidth-based-metrics
Syntax
bandwidth-based-metrics {bandwidth value;metric number;}
Hierarchy Level
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name protocols ospf area area-id interface interface-name topology topology-name],[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area area-id interface interface-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],[edit logical-systems logical-system-name protocols ospf area area-id interface interface-name topology topology-name],[edit logical-systems logical-system-name routing-instances routing-instances protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name],[edit protocols (ospf | ospf3) area area-id interface interface-name],[edit protocols ospf area area-id interface interface-name topology topology-name],[edit protocols ospf3 realm (ivp4-unicast | ipv4-multicast
| ipv6-multicast) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name],[edit routing-instances routing-instance-name protocols ospf area area-id interface interface-name topology topology-name],[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)
area area-id interface interface-name]
Release Information
Statement introduced in JUNOS Release 9.5.
Statement introduced in JUNOS Release 9.5 for EX Series switches.
Description
Specify a set of bandwidth threshold values and
associated metric values for an OSPF interface or for a topology on
an OSPF interface. When the bandwidth of an interface changes, the
JUNOS Software automatically sets the interface metric to the value
associated with the appropriate bandwidth threshold value.
Options
bandwidth value—Specify the bandwidth threshold in bits per second.
- Range: 9600 through 1,000,000,000,000,000
metric number—Specify a
metric value to associate with a specific bandwidth value.
- Range: 1 through 65,535
 | Note:
You must also configure a static metric value for the
OSPF interface or topology with the metric statement. The
JUNOS Software uses this value to calculate the cost of a route from
the OSPF interface or topology if the bandwidth for the interface
is higher than of any bandwidth threshold values configured for bandwidth-based
metrics. |
Required Privilege Level
routing—To view this statement in the
configuration.
routing-control—To add this statement to the configuration.
Published: 2010-01-13
