show poe interface
Syntax
Release Information
Command introduced in JUNOS Release 9.0 for EX Series switches.
Description
Display the status of Power over Ethernet (PoE) ports.
Options
- none
Display status of all PoE ports on the switch.
- interface-name
(Optional) Display the status of a specific PoE port on the switch.
Additional Information
Required Privilege Level
view
List of Sample Output
show status for all poe interfaces on the switchshow status for a specific PoE interface on the switch
Output Fields
Table 1 lists the output fields for the show poe interface command. Output fields are listed in the approximate order in which they appear.
Table 1: show poe interface Output Fields
Field Name | Field Description | |
|---|---|---|
PoE Interface | Specifies the interface address. | |
Enabled | Specifies whether PoE capabilities are enabled or disabled. | |
status | Specifies whether PoE is currently being provided to the port. | |
max-power | Specifies the maximum power that can be provided to the port. | |
priority | Specifies whether the port is high or low priority. | |
power-consumption | Specifies how much power is being used by the port, as measured by the specified telemetries settings. | |
Class | Indicates the IEEE 802.af classification that defines the maximum power requirements for a powered device. | |
Sample Output
show status for all poe interfaces on the switch
user@host> show poe interface
Interface Enabled status max-power priority power-consumption Class ge-0/0/1 Enabled OFF 15.4W Low 0.0W 0 ge-0/0/3 Enabled OFF 12.0W High 0.0W 0 ge-0/0/5 Enabled OFF 15.4W Low 0.0W 0
show status for a specific PoE interface on the switch
user@host> show poe interface ge-0/0/3PoE interface status: PoE interface : ge-0/0/3 PoE capability of the interface : Enabled Current status of power supply on interface : OFF Power limit on the interface : 12.0W Priority : High Power consumed : 0.0W Class of power device : 0
