show isis backup label-switched-path
Syntax
Syntax (EX Series Switch)
Release Information
Command introduced in JUNOS Release 9.5.
Command introduced in JUNOS Release 9.5 for EX Series switches.
Description
Display information about MPLS label-switched-paths (LSPs) designated as backup routes for IS-IS routes.
Options
- none
Display information about MPLS LSPs designated as backup routes for IS-IS routes.
- logical-system (all | logical-system-name
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
Related Topics
List of Sample Output
show isis backup label-switched-pathOutput Fields
Table 72 lists the output fields for the show isis backup label-switched-path command. Output fields are listed in the approximate order in which they appear.
Table 72: show isis backup label-switched-path Output Fields
Field Name | Field Description |
|---|---|
Backup MPLS LSPs | List of MPLS LSPs designated as backup paths for IS-IS routes. |
Egress | IP address of the egress routing device for the LSP. |
Status | State of the LSP:
|
Last change | Time elapsed since the neighbor state changed either from up or down or from down to up. The format is hh:mm:ss. |
TE-metric | Configured traffic engineering metric. |
Metric | Configured metric. |
Sample Output
show isis backup label-switched-path
user@host> show isis backup label-switched-path Backup MPLS LSPs:
f-to-g, Egress: 192.168.1.4, Status: up, Last change: 06:12:03
TE-metric: 9, Metric: 0
