show chassis power

AC/DC PEM number

AC or DC PEM number on the chassis.

Limits

Power limits for the DPC:

• Voltage—Voltage supply limit for the DPC.
• Current—Power limit for the DPC, in watts.
• Rating—Rating limit for output power for the chassis, in watts.
• MaxDPC—Maximum power rating for the DPC, in watts.

Input

Input power details for the DPC:

• Zone—Zone in which the PEM is located: 0 or 1.
• Feed—The input power feed for the PEM: 1 or 2 feeds.
• Switch—The Dip Switch number for the input power feed: 0 or 1 feeds.
• Code—Configuration code for feed and Dip Switch:
  • 1–G—(MX960 router AC and DC PEMS) 1 feed with dip switch 0 is configured. This is correct configuration.
  • 1–B—(MX960 router AC and DC PEMS) 1 feed with dip switch 0 is configured. This is incorrect configuration.
  • 2–B—(MX960 router AC and DC PEMS) 2 feeds with dip switch 0 is configured. This is incorrect configuration.
  • 2–G—(MX960 router AC and DC PEMS) 2 feeds with dip switch 1 are configured. This is correct configuration.
  • 1–L—(MX480 router AC PEMS) Indicates low current and low voltage. Current should be 16A, voltage should be 100V, available power should be 1450W.
  • 1–H—(MX480 router AC PEMS) Indicates high current and high voltage. Current should be 16A, voltage should be 200V, available power should be 2600W.
  • 1–L—(MX480 router DC PEMS) One feed with dip switch 0 is configured. This indicates low current and low voltage.
  • 1–H—(MX480 router DC PEMS) One feed with dip switch 1 configured. This indicates high current and high voltage.

Output

Actual power output for the DPC:

• Voltage—Actual output voltage, in volts.
• Current—Current power supply for the DPC, in watts.
• Rating—Current power rating for the chassis, in watts.
• Power—Current power supplied to the DPC.
• Load—Current load on the PEM.
• Remaining Power—Unused power available for the DPC, in watts.