Managing ETH-DM Statistics and ETH-DM Frame Counts
- Displaying ETH-DM Statistics Only
- Displaying ETH-DM Statistics and Frame Counts
- Displaying ETH-DM Frame Counts for MEPs by Enclosing CFM Entity
- Displaying ETH-DM Frame Counts for MEPs by Interface or Domain Level
- Clearing ETH-DM Statistics and Frame Counts
Displaying ETH-DM Statistics Only
Purpose
Display ETH-DM statistics.
By default, the show oam ethernet connectivity-fault-management delay-statistics command displays ETH-DM statistics for MEPs in the specified CFM maintenance association (MA) within the specified CFM maintenance domain (MD).
Action
- To display the ETH-DM statistics collected for MEPs belonging
to MA ma1 and within MD md1:
user@host> show oam ethernet connectivity-fault-management delay-statistics maintenance-domain ma1 maintenance-association ma1 - To display the ETH-DM statistics collected for ETH-DM
sessions for the local MEP 201 belonging to MA ma2 and within MD md2:
user@host> show oam ethernet connectivity-fault-management delay-statistics maintenance-domain md2 maintenance-association ma2 local-mep 201 - To display the ETH-DM statistics collected for ETH-DM
sessions from local MEPs belonging to MA ma3 and within
MD md3 to remote MEP 302:
user@host> show oam ethernet connectivity-fault-management delay-statistics maintenance-domain md3 maintenance-association ma3 remote-mep 302
Displaying ETH-DM Statistics and Frame Counts
Purpose
Display ETH-DM statistics and ETH-DM frame counts.
By default, the show oam ethernet connectivity-fault-management mep-statistics command displays ETH-DM statistics and frame counts for MEPs in the specified CFM maintenance association (MA) within the specified CFM maintenance domain (MD).
Action
- To display the ETH-DM statistics and ETH-DM frame counts
for MEPs in MA ma1 and within MD md1:
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md1 maintenance-association ma1 - To display the ETH-DM statistics and ETH-DM frame counts
for the local MEP 201 in MA ma2 and within
MD md2:
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain md2 maintenance-association ma2 local-mep 201 - To display the ETH-DM statistics and ETH-DM frame counts
for the local MEP in MD md3 and within MA ma3 that participates in an ETH-DM session with the remote MEP 302:
user@host> show oam ethernet connectivity-fault-management mep-statistics maintenance-domain ma3 maintenance-association ma3 remote-mep 302
Displaying ETH-DM Frame Counts for MEPs by Enclosing CFM Entity
Purpose
Display ETH-DM frame counts for CFM maintenance association end points (MEPs).
By default, the show oam ethernet connectivity-fault-management mep-database command displays CFM database information for MEPs in the specified CFM maintenance association (MA) within the specified CFM maintenance domain (MD).
 | Note: At the router attached to the initiator MEP for a one-way session, or at the router attached to the receiver MEP for a two-way session, you can only display ETH-DM frame counts. |
Action
- To display CFM database information (including ETH-DM
frame counts) for all MEPs in MA ma1 within MD md1:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain ma1 maintenance-association ma1 - To display CFM database information (including ETH-DM
frame counts) only for local MEP 201 in MA ma1 within MD md1:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain md2 maintenance-association ma2 local-mep 201 - To display CFM database information (including ETH-DM
frame counts) only for remote MEP 302 in MD md3 within MA ma3:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain ma3 maintenance-association ma3 remote-mep 302
Displaying ETH-DM Frame Counts for MEPs by Interface or Domain Level
Purpose
Display ETH-DM frame counts for CFM maintenance association end points (MEPs).
By default, the show oam ethernet connectivity-fault-management interfaces command displays CFM database information for MEPs attached to CFM-enabled Ethernet interfaces on the router or at a maintenance domain level. For Ethernet interfaces that support ETH-DM, any frame counts are also displayed when you specify the detail or extensive command option.
| Note: At the router attached to the initiator MEP for a one-way session, or at the router attached to the receiver MEP for a two-way session, you can only display ETH-DM frame counts. |
Action
- To display CFM database information (including ETH-DM
frame counts) for all MEPs attached to CFM-enabled Ethernet interfaces
on the router:
user@host> show oam ethernet connectivity-fault-management interfaces detail - To display CFM database information (including ETH-DM
frame counts) only for the MEPs attached to CFM-enabled router interface ge-5/2/9.0:
user@host> show oam ethernet connectivity-fault-management interfaces ge-5/2/9.0 detail - To display CFM database information (including ETH-DM
frame counts) only for MEPs enclosed within CFM maintenance domains
(MDs) at level 6:
user@host> show oam ethernet connectivity-fault-management interfaces level 6 detail
Clearing ETH-DM Statistics and Frame Counts
Purpose
Clear the ETH-DM statistics and ETH-DM frame counts.
By default, statistics and frame counts are deleted for all MEPs attached to CFM-enabled interfaces on the router. However, you can filter the scope of the command by specifying an interface name.
Action
- To clear the ETH-DM statistics and ETH-DM frame counts
for all MEPs attached to CFM-enabled interfaces on the router:
user@host> clear oam ethernet connectivity-fault-management statistics - To clear the ETH-DM statistics and ETH-DM frame counts
only for MEPs attached to the logical interface ge-0/5.9.0:
user@host> clear oam ethernet connectivity-fault-management statistics ge-0/5/9.0
Related Topics
- clear oam ethernet connectivity-fault-management statistic command
- show oam ethernet connectivity-fault-management delay-statistics command
- show oam ethernet connectivity-fault-management interfaces (detail | extensive) command
- show oam ethernet connectivity-fault-management mep-statistics command
- show oam ethernet connectivity-fault-management mep-database command
