Index
Symbols
- #, comments in configuration statements 1
- ( ), in syntax descriptions 1
- 10-Gigabit Ethernet interfaces 1
- 10-Gigabit Ethernet IQ PIC 1
- 10–port 10-Gigabit Ethernet OSE PIC
- 128-bit IPv6 address 1
- 32-bit IPv4 address 1
- 802.1ag OAM
- configuring Ethernet interfaces 1
- 802.1Q VLANs
- 802.1Q/Ethernet 802.3 encapsulation
- encapsulation overhead 1
- 802.1Q/Ethernet SNAP encapsulation
- encapsulation overhead 1
- 802.1x Port-Based Network Access Control 1
- 802.3ad statement 1
- usage guidelines 1
- 802.3ah OAM
- < >, in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- | (pipe), in syntax descriptions 1
A
- accept statement 1
- accept-source-mac statement 1
- usage guidelines 1
- access interface
- interface-mode statement 1
- access profile
- access-concentrator statement 1
- usage guidelines 1
- access-profile statement 1
- accounting profiles
- accounting statement 1
- usage guidelines 1
- accounting-profile statement 1
- acfc statement 1
- usage guidelines 1
- acknowledge-retries statement 1
- acknowledge-timer statement 1
- usage guidelines 1
- action statement
- action-profile statement
- action-red-differential-delay statement 1
- usage guidelines 1
- activation-delay statement 1
- usage guidelines 1
- activation-priority statement 1
- active statement
- usage guidelines 1
- address and control field compression 1
- address entries 1
- address statement 1
- ADSL
- advertise-interval statement 1
- APS
- usage guidelines 1
- advertisement intervals
- APS interfaces 1
- ae
- physical part of interface name 1
- age statement 1
- agent-specifier statement
- PPPoE 1
- aggregate statement 1
- aggregate-ports statement 1
- aggregated Ethernet interfaces 1
- aggregated SONET interfaces 1
- aggregated-ether-options statement 1
- usage guidelines 1
- aggregated-sonet-options statement 1
- usage guidelines 1
- aging timer
- ARP 1
- alarm statement 1
- alarm triggers, SONET interfaces
- hold timers 1
- all (tracing flag)
- allow-any-vci statement 1
- allow-fragmentation statement 1
- allow-remote-loopback statement 1
- annex statement 1
- usage guidelines 1
- apply-action-profile statement 1
- APS
- aps statement 1
- ARP
- aging timer 1
- arp option
- policers 1
- ARP proxy, unrestricted
- Ethernet interfaces 1
- arp statement 1
- usage guidelines 1
- ARP table, static
- Ethernet interfaces 1
- as
- physical part of interface name 1
- asynchronous-notification statement 1
- at
- physical part of interface name 1
- ATM cell-relay encapsulation
- encapsulation overhead 1
- ATM encapsulation 1, See also ATM interfaces
- ATM CCC VC multiplex 1
- ATM cell-relay 1
- ATM NLPID 1
- ATM PVC 1
- ATM PVC encapsulation 1, 2
- ATM SNAP 1
- ATM TCC SNAP 1
- ATM TCC SNAP multiplex 1
- ATM VC multiplex 1
- cell-relay accumulation mode 1
- Cisco ATM NLPID 1
- Ethernet over ATM 1
- Ethernet VPLS over ATM 1
- keepalives 1
- Layer 2 switching cross-connects 1
- Multilink PPP over ATM 1
- PPP over ATM 1
- PPP over ATM multiplex 1
- ATM interfaces
- ATM overview 1
- communication with ATM switches
- example configuration 1
- encapsulation 1
- ILMI with cell relay
- example configuration 1
- MTU sizes 1, 2, 3, 4
- PIC type
- example configuration 1
- PPP over ATM encapsulation
- example configuration 1
- virtual circuits
- example configuration 1
- virtual paths
- example configuration 1
- ATM PVC encapsulation 1, 2
- atm-encapsulation statement 1
- ATM-for-ADSL
- example configuration 1
- atm-options statement 1
- ATM-over-ADSL
- ATM-over-SHDSL 1
- atm-scheduler-map statement 1
- ATM-to-Ethernet interworking 1, 2, 3
- ATM1 and ATM2 IQ
- configuration differences 1
- ATM1 interfaces
- ATM2 IQ interfaces
- early packet discard threshold
- example configuration 1
- eight forwarding classes
- example configuration 1
- Layer 2 circuit AAL5 mode
- example configuration 1
- Layer 2 circuit cell-relay mode
- example configuration 1
- Layer 2 circuit cell-relay promiscuous mode
- example configuration 1
- Layer 2 circuit trunk mode
- example configuration 1
- MTU sizes 1, 2, 3
- authentication statement
- authentication-key statement 1
- authentication-profile-name statement 1
- authenticator statement 1
- auto-configure statement 1
- auto-discovery statement 1
- auto-negotiation statement
- auto-reconnect statement 1
- usage guidelines 1
- auto-synchronize statement
- usage guidelines 1
- Automatic Protection Switching See APS
- autonegotiation
- configuring manually 1
B
- backup routers
- VRRP 1
- backup-destination statement 1
- backup-interface statement 1
- backup-options statement 1
- bandwidth statement 1
- usage guidelines 1
- bandwidth-limit statement
- bchannel-allocation statement 1
- bcm0
- bcm0 interface 1
- bearer-bandwidth-limit statement 1
- BERT
- configuring interface diagnostics 1
- bert-algorithm statement 1
- bert-error-rate statement 1
- usage guidelines 1
- bert-period statement 1
- usage guidelines 1
- bit error rate test See BERT
- BOOTP
- accepting packets 1
- Bootstrap Protocol See BOOTP
- borrower interface
- unnumbered Ethernet or demux 1
- br
- physical part of interface name 1
- braces, in configuration statements 1
- brackets
- Bridge Domain 1
- bridge network
- trunk interface 1
- bridge-domain 1
- bridge-domain statement 1
- broadcast statement 1
- usage guidelines 1
- buildout statement
- bundle statement 1
- burst-size-limit statement
- byte encoding 1
- byte-encoding statement 1
- bytes statement 1
- usage guidelines 1
C
- C-bit parity mode 1
- c2 SONET header byte 1
- callback statement 1
- usage guidelines 1
- callback-wait-period statement 1
- usage guidelines 1
- caller statement 1
- usage guidelines 1
- calling-number statement 1
- usage guidelines 1
- cau4
- physical part of interface name 1
- cbit-parity statement 1
- cbr statement 1
- CCC 1
- ce1
- physical part of interface name 1
- cell-bundle-size statement 1
- Challenge Handshake Authentication Protocol See CHAP
- channel part of interface name 1
- channelized AU-4 interfaces 1, 2, 3
- channelized E1 interfaces
- channelized E1 IQ and IQE interfaces
- time slots 1
- channelized E1 IQ interfaces
- channelized E1 IQE interfaces
- channelized E3 (COC48/STM16) interfaces
- example configuration 1
- channelized interfaces
- clock sources 1
- channelized IQ interfaces
- supported options 1
- channelized NxDS0 IQ interfaces
- channelized NxDS0 IQE interfaces
- example configuration 1
- channelized OC12 (COC48/STM16 IQE) interfaces 1
- example configuration 1
- channelized OC12 interfaces
- channelized OC12 IQ interfaces
- example configuration 1
- channelized OC3 (COC48/STM16 IQE) interfaces 1
- example configuration 1
- channelized OC3 interfaces 1
- example configuration 1
- channelized OC48 interfaces
- SONET header bytes 1
- channelized OC48 IQE interfaces
- example configuration 1
- channelized STM1 interfaces
- channelized STM1 IQ interfaces
- example configuration 1
- channelized T1 (COC48/STM16 IQE) interfaces
- VT mapping 1
- channelized T1 interfaces
- channelized T1 IQ and IQE interfaces
- example configuration 1
- channelized T1 IQ interfaces
- channelized T1 IQE interfaces
- VT mapping 1
- channelized T1 or CT1 (COC48/STM16, SDH mode) IQE interfaces
- example configuration 1
- channelized T3 (COC48/STM16 IQE) interfaces
- example configuration 1
- channelized T3 interfaces
- channelized T3 IQ and IQE interfaces
- example configuration 1
- channelized T3 IQ interfaces
- example configuration 1
- channelized T3 IQE interfaces
- example configuration 1
- CHAP 1, 2
- chap statement 1
- chap-secret statement 1
- checksums See frame checksums
- ci
- physical part of interface name 1
- circuit cross-connect (CCC)
- circuit cross-connect CCC 1
- Circuit Emulation PIC E1 interfaces
- configuration statements
- E1 options 1
- Circuit Emulation PIC T1 interfaces
- configuration statements
- T1 options 1
- Circuit Emulation PICs 1
- circuit pairs, APS 1
- circuit-type statement
- Cisco HDLC encapsulation 1
- cisco-interoperability statement 1
- class of service See CoS
- classifier statement 1
- usage guidelines 1
- clear-dont-fragment-bit statement 1
- client statement 1
- clock rates 1
- clock sources 1, 2, 3, 4
- channelized interfaces 1
- clock-rate statement 1
- usage guidelines 1
- clocking modes 1
- clocking statement 1
- clocking-mode statement 1
- usage guidelines 1
- coc1
- physical part of interface name 1
- coc12
- physical part of interface name 1
- coc3
- physical part of interface name 1
- coc48
- physical part of interface name 1
- comments, in configuration statements 1
- communication with ATM switches
- example configuration 1
- compatibility-mode statement 1
- compression 1
- compression statement 1
- compression-device statement 1
- Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface 1
- Configuring a VLAN-Bundled Logical Interface 1, 2
- Configuring Logical Link-Layer Encapsulation to Support CCCs 1
- Configuring VLAN ID List-Bundled Logical Interfaces That Connect CCCs 1
- connections
- connections statement 1
- usage guidelines 1
- connectivity-fault management 1, 2
- connectivity-fault-management statement 1
- container interfaces 1
- container-devices statement 1
- device-count 1
- container-list statement 1
- container-options statement 1
- container-type statement 1
- continuity-check statement 1
- control leads
- serial interfaces 1
- control-channel statement 1
- control-leads statement
- usage guidelines 1
- control-polarity statement 1
- usage guidelines 1
- control-signal statement 1
- usage guidelines 1
- conventions
- text and syntax 1
- copy-tos-to-outer-ip-header statement 1
- core-dump statement 1
- usage guidelines 1
- CoS
- eight forwarding classes
- example configuration 1
- cp
- physical part of interface name 1
- crc-major-alarm-threshold statement 1
- crc-minor-alarm-threshold statement 1
- cstm1
- physical part of interface name 1
- cstm16
- physical part of interface name 1
- cstm4
- physical part of interface name 1
- ct1
- physical part of interface name 1
- ct3
- physical part of interface name 1
- cts statement 1
- usage guidelines 1
- cts-polarity statement 1
- usage guidelines 1
- curly braces, in configuration statements 1
- current statement 1
- customer support 1
- contacting JTAC 1
D
- damping
- data circuit-terminating equipment See DCE
- data terminal equipment See DTE
- data-input statement 1
- database (tracing flag) 1
- dcd statement 1
- usage guidelines 1
- dcd-polarity statement 1
- usage guidelines 1
- DCE 1, 2, 3
- dce statement 1
- usage guidelines 1
- dce-options statement 1
- deactivation-delay statement 1
- usage guidelines 1
- default router addresses 1
- default-actions statement 1
- default-chap-secret statement 1
- default-pap-password statement 1
- defect triggers, SONET interfaces 1
- delimiter statement
- demux
- physical part of interface name 1
- demux interfaces 1
- demux-destination statement 1, 2
- demux interfaces 1
- demux-options statement 1
- demux-source statement 1, 2
- demux interfaces 1
- demux0 statement 1
- dense wavelength-division multiplexing See DWDM
- description statement 1
- descriptors, interface 1
- destination statement 1
- destination-class usage
- example configuration 1
- destination-class-usage statement 1
- usage guidelines 1
- destination-profile
- usage guidelines 1
- destination-profile statement 1
- usage guidelines 1
- dfc
- physical part of interface name 1
- DHCP
- accepting 1
- dial-options statement 1
- dial-string statement 1
- usage guidelines 1
- dialer statement 1
- dialer-options
- usage guidelines 1
- dialer-options statement 1
- dialin statement 1
- direction statement 1
- disable statement 1
- disable-mlppp-inner-ppp-pfc statement 1
- disabling
- discard interface 1
- discovery stage
- PPPoE 1
- dlci statement 1
- do-not-fragment statement 1
- documentation
- comments on 1
- domain-name statement
- DHCP relay agent 1
- donor interface
- unnumbered Ethernet or demux 1
- dot1x
- configuration statements 1
- dot1x statement 1
- down-count statement 1
- drop-timeout statement 1
- ds
- physical part of interface name 1
- ds0-options statement 1
- DS3 IQ interfaces
- dsc
- physical part of interface name 1
- dsl-options statement 1
- usage guidelines 1
- dsr statement 1
- usage guidelines 1
- dsr-polarity statement 1
- usage guidelines 1
- DTE 1
- dte-options statement 1
- DTR circuit
- serial interfaces 1
- dtr statement 1
- usage guidelines 1
- dtr-circuit statement 1
- usage guidelines 1
- dtr-polarity statement 1
- usage guidelines 1
- dual-tag framing
- VLAN ID list 1
- dump-on-flow-control statement 1
- DWDM 1, 2
- Dynamic Host Configuration Protocol See DHCP
- dynamic VLANs 1
- authenticating 1
- dynamic-call-admission-control statement 1
- dynamic-profile statement
E
- E-LMI 1, 2
- e1
- physical part of interface name 1
- E1 interfaces
- E1 IQ interfaces
- example configuration 1
- E1 IQE interfaces
- example configuration 1
- e1-options statement 1
- e3
- physical part of interface name 1
- E3 interfaces
- E3 IQ interfaces
- e3-options statement 1
- usage guidelines 1
- east-interface statement 1
- em0
- em1
- em1 interface 1
- em2
- physical part of interface name 1
- empty service action configuration
- PPPoE
- behavior on failure configuration 1
- empty-service statement
- PPPoE 1
- encapsulation 1, See also ATM encapsulation
- encapsulation statement 1
- encoding
- encoding statement 1
- usage guidelines 1
- Enhanced IQ (IQE) interfaces
- channelized OC3 1
- epd-threshold statement 1
- es
- physical part of interface name 1
- es-options statement 1
- ETH-DM
- Ethernet bridging 1, 2
- Ethernet CCC and TCC encapsulation
- physical interfaces 1
- Ethernet CCC encapsulation
- encapsulation overhead 1
- Ethernet configurations, example 1
- Ethernet frame delay measurement
- Ethernet interfaces 1
- 802.1ag OAM 1
- 802.3ah OAM 1
- configuration statements 1
- dynamic VLANs 1
- example configuration 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- gratuitous ARP 1
- internal Ethernet interface 1, 2
- management Ethernet interface 1
- mixed VLAN tagging 1, 2, 3
- passive monitoring 1
- proxy ARP, unrestricted 1
- static ARP table entries 1
- unnumbered 1
- preferred source address 1
- VLAN IDs 1
- VLAN tagging 1, 2, 3
- VRRP 1
- Ethernet link aggregation 1
- Ethernet Local Management Interface See E-LMI
- Ethernet over ATM encapsulation
- Ethernet Ring Protection
- configuration statements 1
- Ethernet Ring Protection Switching, Configuring 1
- Ethernet Service OAM 1
- Ethernet SNAP encapsulation
- encapsulation overhead 1
- ethernet statement 1
- Ethernet switching 1, 2
- Ethernet switching interfaces 1
- Ethernet TCC
- Ethernet VLAN circuit
- VLAN ID list 1
- ethernet-policer-profile statement 1
- ethernet-ring statement 1
- ethernet-switch-profile statement 1, 2
- eui-64 statement 1
- usage guidelines 1
- evcs statement 1
- event (tracing flag) 1
- event statement 1
- event-thresholds
- event-thresholds statement 1
- extended VLAN
- external clock sources 1, 2, 3
- external synchronization interface
- usage guidelines 1
F
- f-max-period statement 1
- f1 SONET header byte 1
- f2 SONET header byte 1
- facility-override statement 1
- fail-filter statement 1
- usage guidelines 1
- failover-delay statement 1
- usage guidelines 1
- family bridge
- family descriptors 1
- family statement 1
- usage guidelines 1
- family type
- specifying for underlying interfaces 1
- Fast Ethernet interfaces
- configuration statements 1
- dynamic VLANs 1
- Ethernet link aggregation 1
- example configuration 1
- ignoring Layer 3 incomplete errors 1
- ingress rate-limit 1
- interface speed 1
- link modes 1, 2
- link protection 1
- loopback mode 1
- MAC address filtering 1
- MTU sizes 1, 2, 3
- physical interface properties 1
- proxy ARP, unrestricted 1
- speed 1
- static ARP table entries 1
- usage guidelines 1
- VLAN IDs 1, 2
- VLAN tagging 1, 2, 3
- VRRP 1
- fastether-options statement 1
- usage guidelines 1
- fcs statement 1
- SONET interfaces
- usage guidelines 1
- fe
- physical part of interface name 1
- feac-loop-respond statement 1
- filter statement 1
- usage guidelines 1
- filters 1, See also firewall filters
- firewall
- hierarchical-policer 1
- firewall filters
- flexible-vlan-tagging statement 1
- flow control 1
- flow-control statement 1
- usage guidelines 1
- font conventions 1
- force statement 1
- forwarding-class statement 1
- fractional E1 IQ and IQE interfaces
- time slots 1
- fractional E1 IQ interfaces
- fractional E1 IQE interfaces
- example configuration 1
- fractional T1 (COC48/STM16 IQE) interfaces
- fractional T1 interfaces
- fractional T1 IQ interfaces
- fragment-threshold statement 1
- usage guidelines 1
- frame checksums
- SONET interfaces 1
- frame delay, Ethernet See Ethernet frame delay measurement
- Frame Relay encapsulation 1
- Frame Relay ether type encapsulation
- physical interfaces 1
- Frame Relay Ether Type encapsulation 1
- physical interfaces 1
- frame-error statement 1
- frame-period statement 1
- frame-period-summary statement 1
- framing statement 1
- fxp
- physical part of interface name 1
- fxp0
- fxp0 interface
- fxp1
- fxp1 interface 1
- fxp2
G
- ge
- physical part of interface name 1
- ge interface
- configuring otn-options 1
- general (tracing flag) 1
- Gigabit Ethernet interfaces 1, 2
- 802.1ag 1
- 802.3ah 1
- autonegotiation 1
- configuration statements 1
- dynamic VLANs 1
- Ethernet link aggregation 1
- example configuration 1
- flow control 1
- ignoring Layer 3 incomplete errors 1
- link protection 1
- loopback mode 1
- MAC address filtering 1
- MTU sizes 1, 2, 3
- proxy ARP, unrestricted 1
- static ARP table entries 1
- usage guidelines 1
- VLAN IDs 1, 2, 3
- VLAN tagging 1, 2, 3, 4, 5
- VRRP 1
- Gigabit Ethernet IQ interfaces
- Gigabit Ethernet OTN 1
- Gigabit Ethernet uPIM interfaces
- speed 1
- Gigabit Ethernet, IQ, IQ2 and IQ2-E interfaces
- VLAN tag stacking and rewriting 1
- gigether-options statement 1
- usage guidelines 1
- gr
- physical part of interface name 1
- gratuitous ARP 1
- gratuitous-arp-reply statement 1
- usage guidelines 1
- gre
- physical part of interface name 1
- group option
- firewall filters 1
- guard-interval statement 1
H
- hardware-assisted-timestamping statement 1, 2
- HDLC encapsulation
- Cisco HDLC encapsulation 1
- HDLC payload scrambling
- SONET interfaces 1
- header byte values 1
- hello-timer statement 1
- hierarchical-policer statement 1
- hierarchical-schedulers statement 1
- high-plp-max-threshold statement 1
- high-plp-threshold statement 1
- hold-interval statement
- hold-time statement 1
- host statement 1
I
- iccp
- configuration statements 1
- icons defined, notice 1
- idle-cycle-flag statement 1
- serial interfaces
- usage guidelines 1
- idle-timeout
- usage guidelines 1
- idle-timeout statement 1
- IEEE 802.1p policer profile
- usage guidelines 1
- ieee802.1p statement 1
- if-exceeding statement
- hierarchical policer 1
- ignore statement 1
- ignore-all statement 1
- usage guidelines 1
- ignore-l3-incompletes statement 1
- ignoring Layer 3 incomplete errors 1
- ilmi statement 1
- usage guidelines 1
- ILMI with cell relay
- ima-group-options statement 1
- ima-link-options statement 1
- inactivity-timeout statement 1
- incoming-called-number statement 1
- usage guidelines 1
- incoming-map statement 1
- usage guidelines 1
- incrementing STM ID 1
- indication statement 1
- usage guidelines 1
- indication-polarity statement 1
- usage guidelines 1
- inet protocol family
- interface addresses 1
- inet6 protocol family
- interface addresses 1
- ingress-rate-limit statement 1
- usage guidelines 1
- init-command-string statement 1
- usage guidelines 1
- initial-route-check statement 1
- inner-tag-protocol-id statement 1
- usage guidelines 1
- inner-vlan-id statement 1
- usage guidelines 1
- inner-vlan-id-range statement 1
- input option
- input statement 1
- input-list statement 1
- usage guidelines 1
- input-policer statement 1
- input-priority-map statement 1
- usage guidelines 1
- input-three-color statement 1
- input-vlan-map statement 1
- usage guidelines 1
- instance 1
- Instance 1
- instance statement 1
- integrated routing and bridging interfaces See IRB
- interface addresses
- interface groups 1
- interface naming
- interface preservation 1
- interface range
- expanding member and member range statements 1
- interface ranges 1
- interface statement 1
- interface transitions
- interface-down statement 1, 2
- interface-mode statement 1
- interface-name statement
- interface-range statement 1
- usage guidelines 1
- interface-set statement 1
- interface-status-tlv statement 1
- interface-switch statement 1
- usage guidelines 1
- interface-type statement 1
- channelized (COC48/STM16 IQE) interfaces
- channelized E1 (COC48/STM16) IQE interfaces
- usage guidelines 1
- channelized E1 IQE interfaces
- usage guidelines 1
- channelized E3 (COC48/STM16) IQE interfaces
- usage guidelines 1
- channelized E3 interfaces
- usage guidelines 1
- channelized OC3 interfaces
- usage guidelines 1
- channelized OC3 IQ interfaces
- channelized OC48 IQE interfaces
- usage guidelines 1
- channelized T1 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- channelized T1 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- channelized T1 interfaces
- usage guidelines 1
- channelized T1 IQ interfaces
- channelized T1 IQE interfaces
- usage guidelines 1
- channelized T3 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- channelized T3 IQ and IQE interfaces
- usage guidelines 1
- E1 (COC48/STM16) IQE interfaces
- usage guidelines 1
- NxDS0 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- NxDS0 interfaces
- usage guidelines 1
- T1 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- T3 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- T3 IQ and IQE interfaces
- usage guidelines 1
- interfaces 1
- 10-Gigabit Ethernet DWDM 1
- 10-Gigabit Ethernet framing 1
- aggregated Ethernet 1
- aggregated SONET 1
- channelized E1 PRI 1
- channelized T1 PRI 1
- clock sources 1, 2, 3
- configuration statements 1, 2
- container interfaces 1
- demux underlying 1
- descriptive text 1
- descriptors 1
- disabling 1, 2
- display order in configurations 1
- encapsulation See encapsulation
- firewall filters 1
- Gigabit Ethernet
- configuring 1
- Gigabit Ethernet IQ 1
- Gigabit Ethernet IQ policer
- example configuration 1
- interface-range 1
- mixed VLAN tagging 1, 2, 3
- names 1
- overview 1
- permanent interfaces 1, 2
- physical 1
- services interfaces 1
- transient interfaces 1, 2
- interfaces (tracing flag) 1
- interfaces statement 1
- interleave-fragments statement 1
- internal clock sources 1, 2, 3
- internal Ethernet interface 1, 2
- Internet Protocol Control Protocol See IPCP
- interval statement 1
- inverse-arp statement 1
- invert-data statement 1
- ip
- physical part of interface name 1
- IP addresses
- ipc (tracing flag) 1
- IPCP 1
- ipip
- physical part of interface name 1
- ipsec-sa statement 1
- IPv4 Protocol family
- IPv6 1
- IPv6 Protocol family
- on logical interfaces 1
- IQ interfaces 1
- IQE interfaces 1
- ISDN interfaces
- isdn-options statement 1
- usage guidelines 1
- ISO Protocol family 1, 2
- ITU-T Recommendation Y.1731 1
- ITU-T standards
- ixgbe0
- ixgbe0 interface 1
- ixgbe1
- ixgbe1 interface 1
J
- J Series Routers 1
- jitter, Ethernet frame See Ethernet frame delay measurement
K
L
- l2tp-interface-id statement 1
- LACP
- lacp statement
- LAN PHY 1, 2
- Layer 2 bridging
- Ethernet 1
- Layer 2 circuit cell-relay promiscuous mode
- ATM2 IQ interfaces
- example configuration 1
- Layer 2 circuit transport mode
- ATM2 IQ interfaces
- example configuration 1
- Layer 2 switching cross-connect
- Layer 2.5 VPNs
- Layer 3 incomplete errors 1
- layer2-policer statement 1
- lc
- physical part of interface name 1
- LCC 1
- in a routing matrix based on a TX Matrix Plus router 1
- LCP
- lcp-max-conf-req statement 1
- lcp-restart-timer statement 1
- usage guidelines 1
- leaky bucket properties 1, 2
- level statement 1
- line 1
- protocol 1
- line-card chassis See LCC
- line-encoding statement 1
- line-protocol statement 1
- usage guidelines 1
- line-rate statement 1
- usage guidelines 1
- line-vlan-id statement
- usage guidelines 1
- linear-red-profile statement 1
- usage guidelines 1
- linear-red-profiles statement 1
- link aggregation 1
- SONET interfaces 1
- link modes 1, 2
- link PIC failover
- link protection
- link speed
- link state replication
- APS 1
- link-adjacency-loss statement 1
- link-discovery statement 1
- link-down statement 1
- link-event-rate statement 1
- link-fault management 1
- link-fault-management statement 1
- link-layer-overhead statement 1
- link-mode statement 1
- link-protection statement 1
- link-speed statement 1
- linktrace statement 1
- LMI packets See keepalives
- lmi statement
- lmi-type statement 1
- lo
- physical part of interface name 1
- load sharing
- APS 1
- load-interval statement 1
- usage guidelines 1
- load-threshold statement 1
- usage guidelines 1
- Local Management Interface packets See keepalives
- local name, configuring 1, 2, 3
- local password, configuring 1, 2
- local-name statement 1
- local-password statement 1
- lockout statement 1
- usage guidelines 1
- log files
- log-prefix statement 1
- logical interface properties, statements for 1
- logical interfaces
- accounting profiles 1
- example configuration 1
- CCC 1, 2
- clear loopback detected timer 1
- configuration statements 1
- default router addresses 1
- descriptive text 1
- descriptors 1
- disabling 1
- encapsulation See encapsulation
- example configuration
- dynamic CAC 1
- firewall filters 1
- interface addresses 1, 2
- interface bandwidth 1
- Layer 2 switching cross-connect 1
- logical interface properties 1
- multipoint connections 1
- point-to-point connections 1
- policers 1
- PPP over ATM encapsulation
- example configuration 1
- PPP restart timers 1
- preferred interface addresses 1, 2
- primary interface addresses 1, 2
- primary router addresses 1
- primary router interfaces 1
- protocol families 1, 2
- protocol MTU 1
- protocol redirect messages 1
- SNMP notifications 1
- static ARP table entries 1, 2
- unit numbers 1
- unnumbered interfaces 1
- VLAN IDs 1, 2
- VLAN-bundled
- logical part of interface name 1
- logical routers See logical systems
- logical systems
- logical-interface-policer statement 1
- logical-systems statement 1
- usage guidelines 1
- long-buildout statement 1
- loop timing
- channelized T3 interfaces 1
- loop-timing statement 1
- usage guidelines 1
- loopback capability 1, 2
- loopback mode 1
- loopback statement 1
- 10-Gigabit Ethernet interfaces
- usage guidelines 1
- ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3 1
- Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet 1
- Fast Ethernet interfaces
- usage guidelines 1
- Gigabit Ethernet interfaces
- usage guidelines 1
- no-loopback 1
- serial 1
- serial interfaces
- usage guidelines 1
- SONET interfaces
- usage guidelines 1
- loopback testing 1
- loopback-clear-timer statement 1
- usage guidelines 1
- loss-priority statement 1
- usage guidelines 1
- loss-threshold statement 1
- low-plp-max-threshold statement 1
- low-plp-threshold statement 1
- lowest-priority-defect statement 1
- ls
- physical part of interface name 1
- lsi
- physical part of interface name 1
- lsq-failure-options statement 1
M
- MAC address accounting
- Gigabit Ethernet IQ interfaces 1
- MAC address filtering
- MAC addresses
- mac statement 1
- usage guidelines 1
- mac-address statement 1
- mac-learn-enable statement 1
- usage guidelines 1
- mac-validate statement 1
- Maintenance Intermediate Points 1
- maintenance-association statement 1
- maintenance-domain statement 1
- management Ethernet interface
- manuals
- comments on 1
- master routers
- VRRP 1
- master-only statement 1
- usage guidelines 1
- maximum transmission unit See MTU
- maximum-contexts statement 1
- maximum-requests statement 1
- maximum-vcs statement 1
- mc-ae statement 1
- media (tracing flag) 1
- media MTUs 1, See also MTU
- SONET interfaces 1
- member interfaces
- member statement
- usage guidelines 1
- member-interface-speed statement 1
- member-interface-type statement 1
- member-range statement
- usage guidelines 1
- mep statement 1
- minimum links for aggregation
- minimum-links statement 1
- MIP Half Function 1
- mip-half-function 1
- mip-half-function statement 1
- mixed VLAN tagging 1, 2, 3
- ml
- physical part of interface name 1
- mlfr-uni-nni-bundle-options statement 1
- mo
- physical part of interface name 1
- mode statement 1
- usage guidelines 1
- modem-options statement 1
- usage guidelines 1
- monitor-session statement 1
- usage guidelines 1
- monitoring services interfaces
- physical interface properties 1
- MPLS
- mpls statement
- mrru statement 1
- usage guidelines 1
- ms
- physical part of interface name 1
- MSP 1
- mt
- physical part of interface name 1
- MTU
- physical interfaces 1
- mtu statement 1
- mtun
- physical part of interface name 1
- MTUs
- multicast-dlci statement 1
- multicast-only statement 1
- usage guidelines 1
- multicast-vci statement 1
- multilink-max-classes statement 1
- multiplex section protection See MSP
- multipoint connections 1, 2, See also point-to-multipoint connections
- multipoint statement 1
- usage guidelines 1
- multipoint-destination statement 1
- Multiprotocol Label Switching See MPLS
- multiservice-options statement 1
- usage guidelines 1
- MX Series Routers 1
N
- n391 statement 1
- n392 statement 1
- n393 statement 1
- name-format statement 1
- names 1
- of interfaces 1
- native-vlan-id statement 1
- ncp-max-conf-req statement 1
- ncp-restart-timer statement 1
- usage guidelines 1
- negotiate-address statement 1
- negotiating IP addresses
- IPCP 1
- negotiation-options
- negotiation-options statement 1
- neighbor statement 1
- usage guidelines 1
- no unidirectional statement 1
- no-allow-link-events statement 1
- no-asynchronous-notification statement 1
- no-auto-mdix statement 1
- no-auto-negotiation statement
- no-cbit-parity statement 1
- no-core-dump statement 1
- usage guidelines 1
- no-feac-loop-respond statement 1
- no-flow-control statement 1
- usage guidelines 1
- no-gratuitous-arp-reply statement 1
- usage guidelines 1
- no-gratuitous-arp-request statement 1
- usage guidelines 1
- no-keepalives statement 1
- usage guidelines 1
- no-long-buildout statement 1
- no-loop-timing statement 1
- usage guidelines 1
- no-loopback statement 1
- usage guidelines 1
- no-mac-learn-enable statement 1
- usage guidelines 1
- no-partition statement
- channelized E1 IQ interfaces
- usage guidelines 1
- channelized E1 IQE interfaces
- usage guidelines 1
- channelized OC12 IQ interfaces
- channelized OC12/STM4 interfaces
- usage guidelines 1
- channelized OC3 IQ interfaces
- channelized T3 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- channelized T3 interfaces
- usage guidelines 1
- channelized T3 IQ interfaces
- usage guidelines 1
- no-payload-scrambler statement 1
- SONET interfaces
- usage guidelines 1
- no-redirects statement 1
- usage guidelines 1
- no-source-filtering statement 1
- no-syslog statement 1
- usage guidelines 1
- no-termination-request statement 1
- no-translate-discard-eligible statement 1
- no-translate-fecn-and-becn statement 1
- no-traps statement 1
- no-unframed statement 1
- no-z0-increment statement 1
- usage guidelines 1
- non-revertive statement 1
- nonconfigurable interfaces 1
- normal (tracing flag)
- arp aging timer 1
- notice icons defined 1
- NxDS0 (COC48/STM16) IQE interfaces
- usage guidelines 1
- NxDS0 interfaces
- usage guidelines 1
- NxDS0 IQ interfaces
O
- OAM
- OAM cells See keepalives
- oam statement 1
- oam-liveness statement 1
- oam-period statement 1
- usage guidelines 1
- oc-slice statement 1
- oc12
- physical part of interface name 1
- OC12 interfaces
- oc3
- physical part of interface name 1
- OC3 interfaces 1, 2, 3
- example configuration 1
- oc48
- physical part of interface name 1
- OC48 interfaces
- SONET header bytes 1
- OC48 PIC
- framing 1
- open-timeout statement 1
- operating-mode statement 1
- usage guidelines 1
- optics-options statement 1
- option-82 statement
- otn-options statement 1
- output option
- output statement 1
- output-list statement 1
- usage guidelines 1
- output-policer statement 1
- output-priority-map statement 1
- usage guidelines 1
- output-three-color statement 1
- output-vlan-map statement 1
- overflow option 1
- overflow statement 1
P
- packets (tracing flag) 1
- paired-group statement 1
- usage guidelines 1
- PAP
- configuring default PAP password 1
- pap statement 1
- pap-password statement 1
- parentheses, in syntax descriptions 1
- partition statement 1
- channelized AU-4 (on OC48 IQE) interfaces
- usage guidelines 1
- channelized AU-4 interfaces
- channelized E1 (COC48/STM16) IQE interfaces
- usage guidelines 1
- channelized E1 IQE interfaces
- usage guidelines 1
- channelized E3 (COC48/STM16) IQE interfaces
- usage guidelines 1
- channelized E3 interfaces
- usage guidelines 1
- channelized OC12 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- channelized OC3 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- channelized OC3 interfaces
- usage guidelines 1
- channelized T1 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- channelized T1 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- channelized T1 interfaces
- usage guidelines 1
- channelized T1 IQ interfaces
- channelized T1 IQE interfaces
- usage guidelines 1
- channelized T3 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- channelized T3 IQ and IQE interfaces
- usage guidelines 1
- clear channel STM1, STM4, and STM16 interface
- usage guide 1
- E1 (COC48/STM16) IQE interfaces
- usage guidelines 1
- NxDS0 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- NxDS0 (COC48/STM16) IQE interfaces
- usage guidelines 1
- NxDS0 interfaces
- NxDS0 IQ interfaces
- usage guidelines 1
- SDH (VC-4) interfaces
- T1 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- T3 (COC48/STM16, SDH mode) IQE interfaces
- usage guidelines 1
- T3 IQ and IQE interfaces
- usage guidelines 1
- passive access, configuring 1, 2, 3
- passive monitoring flow
- passive statement 1
- passive-monitor-mode statement 1
- password statement
- path trace identifier 1
- path-database-size statement 1
- path-trace statement 1
- payload-scrambler statement 1
- SONET interfaces
- usage guidelines 1
- payload-size statement 1
- pd
- physical part of interface name 1
- pdu-interval statement 1
- pdu-threshold statement 1
- pe
- physical part of interface name 1
- peer-unit statement 1
- per-unit-scheduler statement 1
- performance-monitoring statement 1
- periodic statement 1
- usage guidelines 1
- permanent interfaces 1, 2
- permanent virtual circuit encapsulation See ATM PVC
- pfc statement 1
- usage guidelines 1
- physical interfaces 1, See also names of specific interfaces
- accounting profiles 1
- example configuration 1
- APS 1
- byte encoding 1
- C-bit parity mode 1
- clock rates 1
- clock sources 1, 2, 3, 4
- clocking mode 1
- configuration statements 1
- DCE 1, 2
- descriptive text 1, 2
- descriptors 1
- disabling 1
- DTR circuit 1
- dynamic VLANs 1
- encapsulation 1
- Ethernet link aggregation 1
- flow control 1
- frame checksums See frame checksums
- HDLC payload scrambling 1
- header byte values 1
- idle cycle flag 1
- keepalives 1
- leaky bucket properties 1, 2
- line encoding 1
- line protocol 1
- link modes 1, 2
- loop timing 1
- loopback capability
- loopback mode 1
- MAC address filtering 1
- media MTU size 1, 2
- mixed VLAN tagging 1, 2, 3
- MSP 1
- path trace identifier 1
- physical interface properties 1
- PPP CHAP 1, 2
- revertive mode, APS 1
- RFC 2615 support 1
- signal polarity 1
- SNMP notifications 1
- SONET defect triggers 1
- SONET link aggregation 1
- speed 1, 2, 3, 4, 5
- statements 1
- time slots 1
- transitions, damping 1
- unidirectional mode
- unidirectional link mode 1
- unidirectional mode, APS 1
- VLAN tagging 1, 2, 3
- physical part of interface name 1
- pic-type statement 1
- pimd
- physical part of interface name 1
- pime
- physical part of interface name 1
- plp-to-clp statement 1
- plp1 statement 1
- usage guidelines 1
- point-to-point connections
- Point-to-Point Protocol encapsulation 1
- point-to-point statement 1
- usage guidelines 1
- policer
- interface 1
- policer statement
- policers
- policing
- pool statement 1
- usage guidelines 1
- pop statement
- pop-all-labels statement 1
- usage guidelines 1
- pop-pop statement
- pop-swap statement
- port statement
- voice services 1
- Port-Based Network Access Control Protocol
- IEEE 802.1x
- dot1x 1
- port-priority statement
- LACP 1
- port-status-tlv statement 1
- post-service-filter statement 1
- PPP
- PPP over ATM encapsulation
- example configuration 1
- PPP properties, assigning
- IPCP 1
- ppp-options statement 1
- PPPD processes, trace operations 1
- PPPoE
- assigning service name table to underlying interface 1
- discovery stage 1
- empty service action configuration 1
- example configuration 1, 2
- flags for tracing operations 1
- log file access for tracing operations 1
- log file size and number 1
- log filenames for tracing operations 1
- regular expressions for tracing operations 1
- service action configuration 1, 2
- service name table creation 1
- service name tables
- service name tables configuration
- configuration overview 1
- tracing operations 1
- PPPoE client
- example configuration 1
- PPPoE server
- example configuration 1
- pppoe-options statement 1
- usage guidelines 1
- pppoe-underlying-options statement
- PPPoE 1
- preferred interface addresses 1, 2
- preferred statement 1
- preferred-source-address statement 1
- premium
- policer 1
- premium statement
- preserve interfaces statement
- usage guidelines 1
- preserve-interface statement 1
- primary interface addresses 1, 2
- primary router addresses 1
- primary router interfaces 1
- primary statement 1
- priority
- schedulers 1
- priority statement 1
- promiscuous-mode statement 1
- usage guidelines 1
- protect circuit, APS
- protect-circuit statement 1
- usage guidelines 1
- protection-group
- configuration statements 1
- protection-group statement 1
- protocol families
- protocol field compression 1
- protocol MTUs 1, See also MTU
- logical interfaces 1
- protocol redirect messages 1
- protocol-down statement 1
- protocols
- protocols connections
- protocols dot1x
- configuration statements 1
- protocols Ethernet Ring Protection
- configuration statements 1
- protocols iccp
- configuration statements 1
- protocols OAM
- configuration statements 1
- protocols statement 1
- protocols VRRP
- proxy statement 1
- usage guidelines 1
- proxy-arp statement 1
- usage guidelines 1
- push statement
- push-push statement
- PVC encapsulation See ATM PVC encapsulation
Q
R
- radius-realm statement
- ranges statement
- rate statement 1
- reassemble-packets statement 1
- reauthentication statement 1
- receive (tracing flag modifier) 1
- receive-bucket statement 1
- receive-options-packets statement 1
- receive-ttl-exceeded statement 1
- red-differential-delay statement 1
- redial-delay statement 1
- redirect messages 1
- redundancy-options statement 1
- remote statement 1
- remote-loopback statement 1
- remote-loopback-respond statement 1
- remote-mep statement 1
- request statement 1
- required-depth statement 1
- usage guidelines 1
- retries statement 1
- revert-time statement 1
- usage guidelines 1
- revertive mode, APS 1
- revertive statement 1
- rewrite VLAN tag on untagged frame
- usage guidelines 1
- rewrite-on-egress statement
- usage guidelines 1
- rewrite-on-ingress statement
- usage guidelines 1
- RFC 2615 support, SONET interfaces 1
- rfc-2615 statement 1
- usage guidelines 1
- ring-protection-link-end statement 1
- ring-protection-link-owner statement 1
- rlsq
- physical part of interface name 1
- rms
- physical part of interface name 1
- routers
- Routing Instance 1
- routing matrix
- routing-instance 1
- routing-instance statement 1
- rpf-check statement 1
- usage guidelines 1
- rsp
- physical part of interface name 1
- rtp statement 1
- rts statement 1
- rts-polarity statement 1
- usage guidelines 1
- rtvbr statement 1
S
- s1 SONET header byte 1
- sampling on aggregated links 1
- example configuration 1
- sampling statement 1
- satop-options
- payload-size 1
- satop-options statement 1
- SCC 1
- scheduler-maps statement 1
- schedulers statement 1
- SDH (VC-4) interfaces
- SDH (VC-4-4C) interface
- SDH interfaces 1, See also SONET interfaces
- se
- physical part of interface name 1
- secondary statement 1
- send (tracing flag modifier) 1
- send-critical-event statement 1
- separators, in interface names 1
- serial interfaces
- serial-options statement 1
- usage guidelines 1
- server statement 1
- server-timeout statement 1
- service 1
- service action configuration
- service name table creation
- PPPoE 1
- service name tables
- service statement
- service-domain statement 1
- service-filter statement 1
- service-name statement 1
- usage guidelines 1
- service-name-table statement
- PPPoE underlying interface 1
- service-name-tables statement
- PPPoE 1
- service-set statement 1
- services interfaces 1
- services statement 1
- services-options statement 1
- SFC 1
- shaping statement 1
- SHDSL 1
- shdsl-options statement 1
- usage guidelines 1
- short-name-format statement 1
- short-sequence statement 1
- signal polarity, serial interfaces 1
- snext statement 1
- usage guidelines 1
- snr-margin statement 1
- usage guidelines 1
- so
- physical part of interface name 1
- SONET interfaces 1, See also SDH interfaces
- APS 1
- clock sources 1, 2
- configuration statements 1
- damping interface transitions 1
- defect triggers 1
- encapsulation 1, 2
- example configuration 1
- frame checksum 1
- framing 1
- HDLC payload scrambling 1
- header byte values 1
- incrementing STM ID 1
- leaky bucket properties 1
- link aggregation 1
- loopback capability 1
- MTU sizes 1, 2, 3, 4
- overview 1
- path trace identifier 1
- physical interface properties 1
- RFC 2615 support 1
- SONET parameters
- on channelized OC12 interfaces 1
- sonet-options statement 1
- SONET/SDH interfaces
- source address filtering
- source statement 1
- source-address-filter statement 1
- usage guidelines 1
- source-class usage
- example configuration 1
- source-class-usage statement 1
- usage guidelines 1
- source-filtering statement 1
- sp
- physical part of interface name 1
- Specifying the Interface Over Which VPN Traffic Travels to the CE Router 1
- Specifying the Interface to Handle Traffic for a CCC 1
- Specifying the Interface to Handle Traffic for a CCC Connected to the Layer 2 Circuit 1
- speed statement
- spid1 statement 1
- spid2 statement 1
- stacked VLAN-tag framing
- VLAN ID list 1
- stacked-vlan-ranges statement 1
- stacked-vlan-tagging statement 1
- usage guidelines 1
- start-end-flag statement 1
- startup-silent-period statement
- usage guidelines 1
- state (tracing flag) 1
- static ARP table entries
- static routes
- unnumbered Ethernet interfaces 1
- static-tei-val statement 1
- stm1
- physical part of interface name 1
- STM1 interfaces
- example configuration 1
- stm16
- physical part of interface name 1
- stm4
- physical part of interface name 1
- supplicant statement
- single (mode) 1
- supplicant-timeout statement 1
- support, technical See technical support
- swap statement
- swap-push statement
- swap-swap statement
- switch-card chassis SCC 1
- switch-fabric chassis SFC 1
- switch-options statement 1
- switch-port statement
- access switching 1
- switch-type statement 1
- switching-mode statement 1
- usage guidelines 1
- symbol-period statement 1
- Symmetrical Load Balancing
- on 802.3ad Link Aggregation on MX Series 1
- Synchronous Digital Hierarchy See SDH interfaces
- Synchronous Optical Network See SONET interfaces
- syntax conventions 1
- syslog statement 1
- usage guidelines 1
- system processes
- configuration statements 1
- system-priority statement
- LACP 1
T
- t1
- physical part of interface name 1
- T1 interfaces
- T1 IQ and IQE interfaces
- example configuration 1
- T1 IQ interfaces
- example configuration 1
- t1-options statement 1
- usage guidelines 1
- T1600 routers
- configured in a routing matrix 1
- t3
- physical part of interface name 1
- T3 interfaces
- T3 IQ and IQE interfaces
- example configuration 1
- t3-options statement 1
- usage guidelines 1
- t310 statement 1
- usage guidelines 1
- t391 statement 1
- t392 statement 1
- T640 routers 1
- tag-protocol-id statement 1
- tap
- physical part of interface name 1
- TCC 1
- encapsulation 1
- technical support
- contacting JTAC 1
- tei-option statement 1
- then statement
- hierarchical policer 1
- threshold statement 1
- time slots
- channelized E1 IQ and IQE interfaces 1
- channelized E1 IQE interfaces 1
- channelized NxDS0 IQ interfaces 1, 2
- E1 interfaces
- example configuration 1
- fractional E1 IQ and IQE interfaces 1
- fractional E1 IQ interfaces 1, 2
- fractional T1 (COC48/STM16 IQE) interfaces 1, 2
- fractional T1 interfaces 1, 2
- T1 interfaces
- example configuration 1
- timer (tracing flag)
- Ethernet interface speed 1
- timers
- APS 1
- timeslots statement 1
- channelized E1 IQ and IQE interfaces
- usage guidelines 1
- channelized E1 IQ interfaces
- usage guidelines 1
- channelized E1 IQE interfaces
- usage guidelines 1
- channelized NxDS0 IQ interfaces
- fractional E1 IQ and IQE interfaces
- usage guidelines 1
- fractional E1 IQ interfaces
- usage guidelines 1
- fractional E1 IQE interfaces
- usage guidelines 1
- fractional T1 (COC48/STM16 IQE) interfaces
- fractional T1 interfaces
- NxDS0 (COC48/STM16 IQE) interfaces
- usage guidelines 1
- NxDS0 interfaces
- usage guidelines 1
- tm statement 1
- usage guidelines 1
- tm-polarity statement 1
- usage guidelines 1
- trace operations
- VRRP 1
- traceoptions (LACP) statement
- usage guidelines 1
- traceoptions statement 1
- tracing flags
- tracing operations
- transient interfaces 1, 2
- transitions
- damping 1
- transitions, damping 1
- translate-discard-eligible statement 1
- translate-fecn-and-becn statement 1
- translational cross-connect See TCC
- translational cross-connect encapsulation See TCC, encapsulation
- transmit clock sources 1, 2
- transmit-bucket statement 1
- transmit-clock statement 1
- usage guidelines 1
- transmit-period statement 1
- transmit-weight statement 1
- usage guidelines 1
- traps statement 1
- Tri-Rate Ethernet copper interfaces
- speed 1
- Tri-Rate Ethernet interfaces
- interface speed 1
- trigger statement 1
- trigger-link-failure statement 1
- Trivial Network Protocol family
- trunk interface 1
- trunk port 1, 2
- VLAN ID list 1
- trunk-bandwidth statement 1
- trunk-id statement 1
- ttl statement 1
- tunnel statement 1
- TX Matrix Plus router
- TX Matrix router
U
- umd
- physical part of interface name 1
- underlying interface
- assigning a PPPoE service name table 1
- underlying interfaces
- specifying family type for 1
- underlying-interface statement 1
- unframed statement 1
- unicast RPF 1
- unidirectional link mode 1
- unidirectional mode, APS 1
- unidirectional statement 1
- unit numbers 1
- unit statement
- unnumbered interfaces
- unnumbered-address statement 1
- unnumbered-interface statement
- up-count statement 1
- uPIM Ethernet interfaces 1
- USB modem
- configuring 1
- user-prefix statement
- username-include statement
V
- vbr statement 1
- vc-cos-mode statement 1
- vc4
- physical part of interface name 1
- vci statement 1
- vci-range statement 1
- VCIs 1
- VCs 1
- virtual circuits See ATM VCs
- virtual paths See ATM VPs
- Virtual Router Redundancy Protocol See VRRP
- virtual-switch statement 1
- VLAN
- Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface 1
- Configuring a VLAN-Bundled Logical Interface 1
- Configuring Logical Link-Layer Encapsulation to Support CCCs 1
- Configuring VLAN ID List-Bundled Logical Interfaces That Connect CCCs 1
- Specifying the Interface Over Which VPN Traffic Travels to the CE Router 1
- Specifying the Interface to Handle Traffic for a CCC 1
- VLAN CCC
- VLAN CCC encapsulation
- VLAN IDs 1
- values, listed by Ethernet interface type 1
- VLAN tag stacking and rewriting
- Gigabit Ethernet, IQ, IQ2 and IQ2-E interfaces 1
- VLAN tagging 1, 2, 3
- VLAN VPLS
- vlan-id statement 1
- vlan-id-list 1
- vlan-id-list statement
- vlan-id-range statement 1
- vlan-ranges statement 1
- vlan-rewrite statement 1
- vlan-tagging statement 1
- vlan-tags statement
- vlan-tags-outer statement 1
- vlan-vci-ccc encapsulation
- ATM-to-Ethernet interworking 1
- vlan-vci-tagging statement 1
- ATM-to-Ethernet interworking 1
- VLANs
- voice over IP
- dynamic CAC 1
- vpi statement 1
- VPIs 1
- vpls protocol family
- VPNs
- unicast RPF 1
- VPs 1
- VRRP 1
- vrrp
- failover-delay 1
- vsp
- physical part of interface name 1
- vt
- physical part of interface name 1
- VT mapping
- vtmapping statement 1
- usage guidelines 1
W
- WAN PHY 1
- configuring 1
- warning statement 1
- watch-list statement 1
- usage guidelines 1
- wavelength statement 1
- usage guidelines 1
- wavelength-division multiplexing See WDM
- WDM 1, 2
- weighted random early detection 1
- west-interface statement 1
- working circuit, APS
- working-circuit statement 1
- usage guidelines 1
- WRED 1
X
Y
- yellow-differential-delay statement 1
Z