Technical Documentation
Router Advertisement for Subscriber Access, Release 10.1
Dynamic Router Advertisement enables you
to dynamically apply a Router Advertisement configuration when a subscriber
connects to an interface using a particular access technology (for
example, DHCP), enabling the subscriber to access a carrier (multicast)
network.
OverviewConfigurationAdministrationTroubleshooting
| Router Advertisement in Subscriber Access Networks |
|---|
Subscriber access supports the configuration
of the Router Advertisement Protocol at the [edit dynamic-profiles profile-name protocols] hierarchy level. Statements
configured at this hierarchy level are identical in function to those
same statements used for static Router Advertisement Protocol configuration,
with the exception of the interface and prefix statements
which use dynamic variables. For general information about configuring the Router Advertisement
Protocol, see the JUNOS Routing Protocols Configuration
Guide.
|
| |
| Configuration Tasks for Dynamic Router Advertisement |
|---|
Configuration for Dynamic Router Advertisement
are identical to that perform for static Router Advertisement interfaces,
as described in conjunction with configuring Neighbor Discovery, with
the exception of their being configured at the [edit dynamic-profiles profile-name protocols router-advertisement] hierarchy
level. For specific Router Advertisement configuration tasks, see
the JUNOS Routing Protocols Configuration Guide. Only the Dynamic Router Advertisement configuration statements
listed on this page are available at the [edit dynamic-profiles profile-name protocols router-advertisement] hierarchy
level.
|
| |
