Interface Naming Conventions
In the CTP software, interfaces are specified in the format:
type-slot/port
where
- type
Type of interface. A 2-character abbreviation.
- slot
Slot number on the CTP device.
- port
Port number on the CTP device.
If the interface module has a daughter card installed, the interface format is as follows:
type-slot/port w/daughter-card
Table 1: Interface Type Specifiers
| Interface Type | Type Specifier |
|---|---|
4WE&M | 4w |
4WTO | 4w |
E1 | e1 |
IRIG | irig |
Serial | se |
T1 | t1 |
T1E1 | t1e1 |
