Technical Documentation

Interoperability With SAToP-Compliant Equipment Over T1/E1 Circuits

Software for CTP Series, CTPOS 6.0 and CTPView 4.0

Overview
Configuration
Troubleshooting

Using Bundles to Create Logical Configurations for Physical Interfaces Overview

Types of Bundles Overview

Interface Naming Conventions

SAToP Bundle Overview

SAToP Bundle Overview

SAToP Interoperability with M Series E1/T1 Circuit Emulation PICs Overview

Adaptive Clocking for SAToP Bundles Overview

Determining Optimal Packet Size for SAToP Bundles Overview

Providing QoS for SAToP Bundles by Using Service Type Overview

Configuration Example
Example: CTP Interoperability with M Series T1/E1 Circuit Emulation PICs

Adding Bundles

Adding a Bundle (CTPView)

Adding a Bundle (CTP Menu)

Configuring SAToP Bundles (CTP Menu)

Configuring the Default Bundle Data Protocol on the CTP Device (CTP Menu)

Configuring IP Parameters for SAToP Bundles (CTP Menu)

Configuring Virtual IP Parameters for SAToP Bundles (CTP Menu)

Configuring Circuit Restart Parameters for SAToP Bundles (CTP Menu)

Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTP Menu)

Configuring T1 and E1 Port Parameters for SAToP Bundles (CTP Menu)

Configuring Adaptive Clocking for SAToP Bundles (CTP Menu)

Configuring SAToP Bundles (CTPView)

Configuring IP Parameters for SAToP Bundles (CTPView)

Configuring Virtual IP Parameters for SAToP Bundles (CTPView)

Configuring Circuit Restart Parameters for SAToP Bundles (CTPView)

Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTPView)

Configuring T1 and E1 Port Parameters for SAToP Bundles (CTPView)

Configuring Adaptive Clocking for SAToP Bundles (CTPView)

Knowledge Base
http://kb.juniper.net/

Published: 2010-06-21

|

|