 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the VCCPD prefix. They are generated by the virtual chassis control protocol (vccpd) process.
Routing socket version mismatch (kernel kernel-version != vccpd version) -- kernel upgrade required
The virtual chassis control protocol process (VCCPD) discovered that the kernel does not support the version of routing sockets it requires.
Error: An error occurred
error
The kernel version is older than the VCCPD version.
Upgrade the kernel package.
Routing socket message type message-type's version is not supported by kernel, expected version -- kernel upgrade required
The virtual chassis control protocol process (VCCPD) discovered that the kernel does not support the routing socket message types that it requires.
Error: An error occurred
error
The kernel version is older than the VCCPD version.
Upgrade the kernel package.
Routing socket message type message-type's version is older than expected (kernel-version <version) -- consider upgrading the kernel
The virtual chassis control protocol process (VCCPD) discovered that the kernel uses an older version of routing socket message types than it does.
Error: An error occurred
error
The kernel version is older than the VCCPD version.
Upgrade the kernel package.
Lost adjacency to neighbor-system-ids on interface-name,
A virtual chassis adjacency with the indicated neighboring switch was terminated. The local switch no longer exchanges information with the neighboring switch.
Event: This message reports an event, not an error
notice
The communication path to the neighboring switch was disrupted, a protocol error occurred, or the neighboring switch was powered down.
New adjacency to neighbor-system-ids on interface-name
A virtual chassis adjacency was established with the indicated neighboring switch. The local switch can now exchange information with it.
Event: This message reports an event, not an error
info
LSP checksum error, interface interface-name, LSP id lspl, sequence sequence-number, checksum checksum, lifetime duration
The indicated vccpd link-state PDU (LSP) failed an internal checksum validity test, implying that it was corrupted.
Error: An error occurred
warning
The packet was corrupted in transit between the neighboring switch and this switch, or memory on one of the switches was corrupted.
None, unless a large number of these messages appear in the system log file. The corrupted LSP is purged from the virtual chassis and sent again by the originator.
vccpd database overload
The vccpd link-state database is full and no additional memory can be allocated for it.
Error: An error occurred
alert
No additional memory is available for storing vccpd link-state information. Either system resources are exhausted or a software error occurred (such as a memory leak).
Perform one or more of the following actions: (1) Check for unusually high memory usage by vccpd, (2) Add more memory to the switch.
reason: error-message
A system call made by this process failed.
Error: An error occurred
error
It is possible that the kernel lacked the resources to fulfill the request.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |