 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the PING prefix. They are generated by the ping command, which tests whether a remote machine is accessible across the network.
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The jitter for the egress trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The standard deviation of the egress trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The egress trip time measured for a probe exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The jitter for the ingress trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The standard deviation of the ingress trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The ingress trip time measured for a probe exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The number of successive probe failures exceeded the pingCtlTrapProbeFailureFilter threshold.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The jitter for the round trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The standard deviation of the round trip time exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
The round trip time measured for a probe exceeded the configured threshold during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
All probes were sent and the number of failed probes was less than the pingCtlTrapTestFailureFilter threshold.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
All probes were sent but the number of failed probes equaled or exceeded the pingCtlTrapTestFailureFilter threshold.
Event: This message reports an event, not an error
info
pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
An unknown type of threshold event was reported during the indicated test conducted by the indicated user.
Event: This message reports an event, not an error
info
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |