 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
This chapter describes messages with the DCD prefix. They are generated by the interface process (dcd), which controls the physical interface devices and logical interfaces in the routing platform.
Memory allocation failed during initialization for configuration load
The interface process (dcd) could not dynamically allocate memory in preparation for loading a configuration.
Error: An error occurred
error
A software bug caused a memory leak, or the routing platform had insufficient memory.
Contact your technical support representative.
dcd_config: errors while parsing configuration file
The interface process (dcd) encountered an unhandled internal state while parsing the configuration database.
Error: An error occurred
error
There might be a bug in the dcd process' parser.
Contact your technical support representative.
PIC housing interface interface-name does not support clocking as configured
The 'clocking' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the 10-Gigabit Ethernet IQ2 Physical Interface Card (PIC).
Error: An error occurred
warning
Remove the 'clocking' statement from the configuration for the interface.
interface-name: PIC or encapsulation type does not support 'hierarchical-scheduler' statement
The 'hierarchical-scheduler' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported either by the PIC or the configured type of encapsulation.
Error: An error occurred
warning
Remove the 'hierarchical-scheduler' statement from the configuration for the interface.
Interface interface-name does not support 'interface-set' statement
The 'interface-set' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the interface.
Error: An error occurred
warning
Remove the 'interface-set' statement from the configuration for the interface.
interface-name: PIC or encapsulation type does not support 'per-unit-scheduler' or 'shared-scheduler' statement
The 'per-unit-scheduler' or 'shared-scheduler' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported either by the PIC or the configured type of encapsulation.
Error: An error occurred
warning
Remove the 'per-unit-scheduler' or 'shared-scheduler' statement from the configuration for the interface.
interface-name: exceeds the allowed limit (maximum-value) of 'per-unit-scheduler' interface statement for PIC=pic-slot on FPC=fpc-slot
The 'per-unit-scheduler' statement is enabled on more interfaces than what this PIC would suppport.
Error: An error occurred
warning
Remove the 'per-unit-scheduler' statement from the configuration for the interface.
interface-name: PIC type does not support flexible-vlan-tagging statement
The 'flexible-vlan-tagging' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the Physical Interface Card (PIC) that houses the interface.
Error: An error occurred
warning
Remove the 'flexible-vlan-tagging' statement from the configuration for the interface.
dcd_mini_config: errors while parsing configuration overlay
The interface process (dcd) encountered an unhandled internal state during interface parsing.
Error: An error occurred
error
There might be a bug in the dcd process' parser.
Contact your technical support representative.
An unhandled state was encountered during interface parsing
The interface process (dcd) encountered an unhandled internal state during interface parsing.
Error: An error occurred
emergency
There might be a bug in the dcd process' parser.
Contact your technical support representative.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |