 |
Note: As with any configuration involving Multiprotocol Label Switching (MPLS), you cannot configure any of the core-facing interfaces on the PE routers over dense Fast Ethernet Physical Interface Cards (PICs). |
For VPNs to function, you must enable a signaling protocol on the provider edge (PE) routers.
|
Note: As with any configuration involving Multiprotocol Label Switching (MPLS), you cannot configure any of the core-facing interfaces on the PE routers over dense Fast Ethernet Physical Interface Cards (PICs). |
To enable a signaling protocol, perform the steps in one of the following sections:
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |