[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Site

All the Layer 2 circuits provisioned for a local site are listed as the set of logical interfaces (using the interface statement) within the site statement.

On each PE router, you must configure each site that has a circuit to the PE router. To do this, include the site statement:




site site-name {

site-identifier identifier;



site-preference preference-value {
backup;
primary;
}





interface interface-name {

description text;

remote-site-id remote-site-ID;
}


}

You include the site statement at the following hierarchy levels:

[edit routing-instances routing-instance-name protocols l2vpn]
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols l2vpn]

You must configure the following for each site:

site-name—Name of the site.
site-identifier identifier—Unsigned 16-bit number greater than zero that uniquely identifies the site. The site identifier should correspond to a remote site ID configured on another site within the same VPN.
interface interface-name—The name of the interface and, optionally, a remote site ID for remote site connections. See Configuring the Remote Site ID.

[Contents] [Prev] [Next] [Index] [Report an Error]