Configuring the Connection Between the PE and CE Routers

To support IPv6 routes, you must configure BGP, OSPF version 3, or static routes for the connection between the PE and CE routers in the Layer 3 VPN. You can configure BGP to handle just IPv6 routes or both IP version 4 (IPv4) and IPv6 routes.

For more information about IPv6, see the JUNOS Routing Protocols Configuration Guide.

The following sections explain how to configure BGP and static routes:

• Configuring BGP on the PE Router to Handle IPv6 Routes
• Configuring BGP on the PE Router for IPv4 and IPv6 Routes
• Configuring OSPF Version 3 on the PE Router
• Configuring Static Routes on the PE Router

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.