 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
The static-lsp option creates a static flooding point-to-multipoint LSP that includes all of the neighbors in the VPLS routing instance. Flood traffic is sent to all of the VPLS neighbors using the generated point-to-multipoint LSP. VPLS neighbors added to the routing instance later are not automatically added to the point-to-multipoint LSP. You will need to manually add the new VPLS neighbors to the static point-to-multipoint flooding LSP. By configuring static point-to-multipoint LSPs for flooding, you have more control over which path each sub-LSP follows.
To configure a static flooding point-to-multipoint LSP, specify the name of the static flooding point-to-multipoint LSP by including the static-lsp statement:
-
static-lsp lsp-name;
You can configure this statement at the following hierarchy levels:
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |